Prop is stuck on shaft won't come off any ideas? Tring to change drive oil

Bravo one?

what have you tried?? spray lube (liquid wrench or?) and beat with a rubber mallet?

Been doing both right now

Did you take the prop nut off?

Get a big ratchet strap.. tie to the prop and try to put an even bind... to tree / truck??

Put nut on where nut has full treads on shaft.. just shy of flush with shaft..

Tap on nut with hammer..

If you have help.. could have him try pulling as you hit nut first??

I don't mean to laugh but that was freaking funny as hell!

Glad someone gets my humor

Take a three jaw puller & install it on the hub, screw down the center bolt down to put pressure on the prop shaft. You can spray some lube on the shaft but leave pressure on it. Come back after a half hour or so & smack the tightening bolt right on the head a good wallop, the prop should pop right off. Randy

iIt was pretty funny!!! I was trying not to rub it in to the op..