Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   What props do or have you used on your Force hull? Speeds your seeing? (https://www.offshoreonly.com/forums/baja/297969-what-props-do-have-you-used-your-force-hull-speeds-your-seeing.html)

88Force265 07-14-2013 11:37 PM


Originally Posted by fleg1 (Post 3958645)
Do you have bottom paint on your boat? With the 350 mags I wold think that boat would run low to mid 60's....

nope no paint but ^^^look at the post just before yours this is what i ran today still getting the trim thing figured out but she was runnen at a solid 60 today and like i said i have one motor outta adjustment so i cant get anything more outta the throttle till i fix it and i think i could trim a lil more speed outta it just not sure yet (also dont have an outer tie bar so the drives wiggle a bit ) i was hoping for 65mph but we'll see after adjustment and when i learning more about driving with the trims.

92nsx 07-16-2013 08:18 AM

Very good info here guys! Thank you for sharing. I can already see that out hulls like the weight of twins. 60 mph, thats already 5 mph faster then me and more to come for you. 415 hp just dosent cut the cheese for the 265.

Not to change the subject,

Fleg1, I think it weights a little more then 4500 lbs ;) The weight baja gave people back in the day i swear was a number out of a hat, or with out engines.

I went to the cat scale the other day ago just because. Tow vehicle = 2007 Escalade EXT with Curb weight of 6013 (motor trend),, 2007Heritage tandom axel trailer (steel), 90 (guessing 18-2000lbs.). so at 80-8200 lbs that puts my 265 about 57-5900 lbs full of fuel and gear.

http://i212.photobucket.com/albums/c...ps9a51791f.jpg

88Force265 07-21-2013 09:07 PM

New numbers today!! 63!!! (bottom right)

https://fbcdn-sphotos-g-a.akamaihd.n...69385449_n.jpg

92nsx 07-22-2013 11:07 AM

Dam you!!!!! JK. Very nice. I only wish I could see over 60 mph.

ittledoo 07-23-2013 09:26 AM

Funny, I am having a similiar conversation on BBO. I am running a 468ci roller motor w/ a 25P Mirage and topping out at 58GPS @ 4900RPM. Still trying to figure mine out as well...

fleg1 07-23-2013 02:33 PM


Originally Posted by 88Force265 (Post 3962403)
New numbers today!! 63!!! (bottom right)

https://fbcdn-sphotos-g-a.akamaihd.n...69385449_n.jpg

What did you do or change to go from 60 to 63?

88Force265 07-24-2013 06:43 PM


Originally Posted by fleg1 (Post 3963690)
What did you do or change to go from 60 to 63?

played with the trim more i dident wanna over trim last time i was out but i went out and just played with it for a while and found a sweeter spot. and the water was a little bit calmer then the 60mph day

92nsx 07-25-2013 07:13 AM

I found out this passed weekend my 265 is the fastest with a 1 foot chop or so!!!!! The girlfriend didnt like it but I had fun :)

fleg1 07-25-2013 05:17 PM


Originally Posted by 92nsx (Post 3964791)
I found out this passed weekend my 265 is the fastest with a 1 foot chop or so!!!!! The girlfriend didnt like it but I had fun :)

Yep the rougher it is the better they run, mine loved the rough stuff.. I beat the dog snot out of that 1.32 ratio alpha and never had a lick of problems from it..

92nsx 07-26-2013 07:16 AM

Fleg,

Just wondering, what dose your 320 run with what engines?


All times are GMT -5. The time now is 07:18 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.