33' Outlaw x-dimension
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Jul 2013
Location: West Lafayette, Indiana
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
33' Outlaw x-dimension
I know some of you guys have changed your drive height and the height was different from year to year, so.... Whats the best x dimension to run on a 33' without extension boxes?
#2
Platinum Member
Platinum Member
iTrader: (6)
This should be interesting, Im wondering myself, I know -2 lowers help, corrently looking for some
#3
Registered
Thread Starter
iTrader: (1)
Join Date: Jul 2013
Location: West Lafayette, Indiana
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
I think the -1/-2 may work on the older boats like mine (99) but im not sure they work so well on the newer ones. Basically Im just looking for some real world experience. I'd also like to know what people experienced when changing from 1.5 to 1.36 gears. It's time for a drive upgrade for me and im just trying to get my ducks in a row on what my best possible setup would be with out doing it 5 times and learning the hard expensive way.
#4
Registered
Thread Starter
iTrader: (1)
Join Date: Jul 2013
Location: West Lafayette, Indiana
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
When I measure from the bottom of the hull to the center of my prop shaft, on the inside of the drives, I get about 6.5-6.75. If im not mistaken these boats are supposed to be fastest when that measurement is about 4.5?
#5
Platinum Member
Platinum Member
iTrader: (6)
agree, thats why I said -2 imco or speed master
#7
Registered
mine are deep as well, I had read that late 01 or 02s had the X's raised on the 33s and 342 that added a little speed. 4-5mph I think
I am curious about this as well....
I am curious about this as well....
#8
Platinum Member
Platinum Member
iTrader: (6)
Dave at XT would know for sure
mines a 2000 model so I know their deep.
mines a 2000 model so I know their deep.