Motor HP estimate?
12-27-2002 | 01:43 PM
#31
Registered
Joined: Jul 2001
Posts: 28
Likes: 0
From: Scott Depot, WV
SMALL BLOCK FOR SALE
Hey Hyperbaja,
Before you spend a lot of money on a 6 banger let me give you a great deal on a 388 stroker motor already set up. All you have to do is put the water pump, alternator and plumbing on it and drop it in. It even had the oil cooler and the racing headers.
The motor is a ZZ4 block with dart 202 heads, eagle forged crank and eagle rods, J&E pistons, roller cam and rockers, victor jr intake, 2 carbs, an 850 AED for racing and a 750 for cruising. It has lightning headers on it as well. The headers alone were almost $2K.
The motor has been dynoed at 470 hp and 500 ft lbs torque. It has 4 hours on it total. I was going to put it in my boat but traded it for a 25 outlaw instead.
If your interested my e-mail is [email protected].
Before you spend a lot of money on a 6 banger let me give you a great deal on a 388 stroker motor already set up. All you have to do is put the water pump, alternator and plumbing on it and drop it in. It even had the oil cooler and the racing headers.
The motor is a ZZ4 block with dart 202 heads, eagle forged crank and eagle rods, J&E pistons, roller cam and rockers, victor jr intake, 2 carbs, an 850 AED for racing and a 750 for cruising. It has lightning headers on it as well. The headers alone were almost $2K.
The motor has been dynoed at 470 hp and 500 ft lbs torque. It has 4 hours on it total. I was going to put it in my boat but traded it for a 25 outlaw instead.
If your interested my e-mail is [email protected].
