|
I had my lightnings start to leak on the flange between
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set. Why the hell would I buy a new set when they cant even fix their own stuff. All it needed was to reweld the flange and plane it back even. Pretty bad when they cant even fix their own headers. Needless to say I took them back and never dealt with them again. |
Originally Posted by HTRDLNCN
(Post 3144641)
I had my lightnings start to leak on the flange between
inner and outer tubes , sent them to LIghtning to get them fixed and they said the couldnt do it and wanted to nail me for a new set. Why the hell would I buy a new set when they cant even fix their own stuff. All it needed was to reweld the flange and plane it back even. Pretty bad when they cant even fix their own headers. Needless to say I took them back and never dealt with them again. Bummer- ! Uncle Dave |
Originally Posted by RunninHotRacing158
(Post 3144425)
i always contribute to the eliterate
|
Hazen,
Your post is a real contribution. Why don't you crawl back under your rock. |
Originally Posted by Skullkrusher
(Post 3145000)
Hazen,
Your post is a real contribution. Why don't you crawl back under your rock. I thought is was too, thank you! :drink: |
bobby glass says hello
Originally Posted by sonic
(Post 3127652)
Boyd's Motorworks
224 Elmwood Ave. Ext. Gloversville, NY 12078 http://www.boydsmotorworks.com/index.html |
Originally Posted by ROBERT PRITCHARD
(Post 3147608)
:evilb:Just had my motors rebuilt by potter performance down in Bradenton Florida and there awesome! Ron kept me informed through the whole process and also did the rigging the man is fabulous
|
I'm still waiting 21 months...wait 22 months day after tomorrow...for an engine rebuild that "he does all the time". I wish I had done my homework and found a reputable builder anywhere other than Cleveland.
|
Originally Posted by RunninHotRacing158
(Post 3144425)
Hope ya'll enjoyed the BBQ i always contribute to the eliterate ,OSO boating vendors have no problems taking my $$$$$ BIG Daddy and Larrys would of took it again if i was dumb enuf to give him a blank check. Could'nt be happier since we distanced ourselfs from Larrys Engine & Marine ..and go F@ck yourself
|
2 Attachment(s)
Congratz ??? NO blown motor here BIG Daddy still working on spacers & props and we're at 50 hours and still going strong .just waiting for next weeks Lake Winnebago run ,could'nt be happier since we distanced ourselvesfrom LARRYS ENGINE & MARINE:angry-smiley-038: who built motors with BIG CHIEF HEADS & 34 degrees timing and there now at 28 degrees and LUVIN IT ! we're dayz away from 1 year and were reliable a H@LL just check oil & fill her up with 93 Octane and let her rip . :drink:Sorry BIG Daddy no boating Vendors have any trouble taking my Coin $$$
broke Valve ??? cant be BIG Daddy we have Titanium the best $$$ can buy and Mike D. is telling me expect 140/150 hours .See ya on the pond Chalo |
| All times are GMT -5. The time now is 01:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.