Checkmate speeds
#134
Registered
Join Date: Jan 2009
Location: Metamora MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
#135
Registered
The Checkmate section has been dormant for a while so I thought I'd wake it back up with my side project. The boat is a 1990 Checkmate Starflite with a Mercury Pro XB250. I just had the motor rebuilt with new rings, the #6 hole bored .15 over. With 11.5" of setback and the propshaft dead even with the keel I'm running 78mph @ 5800rpm turning a Mercury Trophy Plus 27 @ 5800 rpm. I'm going to raise the motor on the jackplate, swap out the helm for a SeaStar Pro 2.0 helm and try a Sportmaster gear case. With some prop changes I should be able to get the boat to run mid 80's!
#136
Registered User
VIP Member
Join Date: Nov 2014
Location: Toms River,NJ
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
2011 Pulsare 21 ft LD. 2010 Merc 250ProXS Torque master lower running 1.5 inches below the pad. Stock 27 inch Fury. 12 inch set back bracket plus about 5 inch for the jackplate. Runs 82mph any day. Have seen 84mph GPS a few times.
#138
Registered
#139
Registered
The Checkmate section has been dormant for a while so I thought I'd wake it back up with my side project. The boat is a 1990 Checkmate Starflite with a Mercury Pro XB250. I just had the motor rebuilt with new rings, the #6 hole bored .15 over. With 11.5" of setback and the propshaft dead even with the keel I'm running 78mph @ 5800rpm turning a Mercury Trophy Plus 27 @ 5800 rpm. I'm going to raise the motor on the jackplate, swap out the helm for a SeaStar Pro 2.0 helm and try a Sportmaster gear case. With some prop changes I should be able to get the boat to run mid 80's!
#140
Gold Member
Gold Member
Join Date: Oct 2002
Location: central ohio
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts