The Chevy 572 Crate Motors in the Gladiator
 

Re: The Chevy 572 Crate Motors in the Gladiator
 

Here ya go Jeffrey. A couple of the other pics that show off your bad a$$ ride! :drink:

Re: The Chevy 572 Crate Motors in the Gladiator
 

They would look much better with my name laser etched into the breathers! :D

Nice work JC.

Re: The Chevy 572 Crate Motors in the Gladiator
 

How fast is that boat now? how much did you gain from the other motor's? I am looking at new boats but unsure of power yet Ilmor custom or something like you have done.
I currently have a Cig but looking at 33 Eliminator or 32 Spectre.

Re: The Chevy 572 Crate Motors in the Gladiator
 

Only nice if it works Chad! :)

Re: The Chevy 572 Crate Motors in the Gladiator
 

The jury is still out on top speed. Yesterday was the first break in day. The boat ran 88.9 on GPS with 500EFI's in freshwater. I am guessing that these motors put out somewhere around 650hp each. The extra 300+hp should get me into the mid to high 90mph range.

Re: The Chevy 572 Crate Motors in the Gladiator
 

Any changes to the cam or anything to marinize?

To cover reversion issues and so forth?

Re: The Chevy 572 Crate Motors in the Gladiator
 

Don't think Pfaff changed the cam. Didnt have any signs of reversion after Saturday's run. Time will tell ...

Re: The Chevy 572 Crate Motors in the Gladiator
 

That looks great Jeffrey!!!

I have been running zz502/502's for the last 2 1/2 years on my Bullet with no problems, but they had been modified with cam, intake, valves and carb change. A leak down test was done yesterday for the new owner and....after 118 hours...no issues whatsoever.

Re: The Chevy 572 Crate Motors in the Gladiator
 

no one asked you what your running, nor does anyone care.. you dont even own that boat anymore... move on to the future, and your future is lots of fuel, and lots of oil changes... your buddy dave