How do you work the toilet?
03-11-2006 | 09:06 PM
#11
Thread Starter
Registered
Joined: Dec 2000
Posts: 6,986
Likes: 0
From: Austin, Texas
Re: How do you work the toilet?
Thanks again. It works, but...
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
03-12-2006 | 12:08 AM
#12
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Re: How do you work the toilet?
Originally Posted by Clay Washington
Thanks again. It works, but...
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
Until I can inspect the holding tank, I wil set the "Y" valve to discharge into the lake and only allow people to perform #1. No #2!
03-12-2006 | 06:18 AM
#14
VIP Member
Joined: Feb 2004
Posts: 12,314
Likes: 1,556
From: Maryland
Re: Do do you work the toilet?
Originally Posted by Roger 1
And remember, no matter what. NEVER, NEVER, PUSH THE THIRD BUTTON!!!!!! 
Originally Posted by Roger 1
Yeah right! The honor system.....
03-12-2006 | 08:42 AM
#15
Registered
Joined: Mar 2005
Posts: 647
Likes: 0
From: Sarasota, FL
Re: How do you work the toilet?
I have the same problem - I can't get it to flush fresh water, so I must have either and empty tank (is it the main fresh water tank) or is there a smaller one and if so how do I fill it or check it to see if its holding?
35 Cafe 88
35 Cafe 88
03-12-2006 | 09:18 AM
#16
Registered
Joined: Dec 2001
Posts: 3,904
Likes: 1
From: Iowa - Missouri
Re: How do you work the toilet?
Mine had only 1 tank(holding). Draws water direct from the lake to fill & flush. Tank is like 4 gallons and the flush seems like almost 2 gallons.
It don't hold much. My new one has a porta potty , its much easier.
I never want to go through replacing a tank again
But when you do its RDS for the tank and Jabsco parts to rebuild the pump.
It don't hold much. My new one has a porta potty , its much easier.
I never want to go through replacing a tank again
But when you do its RDS for the tank and Jabsco parts to rebuild the pump.
03-12-2006 | 04:50 PM
#17
Registered
Joined: Nov 2004
Posts: 58
Likes: 0
From: wolfeboro nh
Re: How do you work the toilet?
good luck... i built new tank for mine.. then next year i figured out the tank was to small. (4 gals). took out heavy porcelan head and both pumps glassed in a pad and put a portapotti in its place...
