|
Originally Posted by SKRAMER
(Post 2250411)
Try some hydromotive 4 blades may lift the bow more, or turn the props inward.
|
Getting my 2" shortie tomorrow. We'll see how they work.
|
Originally Posted by Sean
(Post 2254221)
, but spinning them in is just going to give me stern lift, so i dont think that is an option...
|
let us know how it works out i put the 2 inch spacers in my shorties to help get it back on plane they say it has to do with the cav plate not on the lower
|
Originally Posted by tony stamis
(Post 2530713)
let us know how it works out i put the 2 inch spacers in my shorties to help get it back on plane they say it has to do with the cav plate not on the lower
|
Originally Posted by SKRAMER
(Post 2250411)
Try some hydromotive 4 blades may lift the bow more, or turn the props inward.
25 p 4 blade hydros...... |
Bolted the shorties on yesterday!!! Almost there!!!
|
I put a pair of 1 inch shorter drives on a 2001 35 ft cig and they work great on the top end but are crap out of the hole. I am going to put spacers in them for the customer to get back to stock height. At least if you dont like them you can put spacers on them and the lower unit back to stock. The lowers will give more mph because they are more hydrodynamic. Good luck with yuor project I hope this helped a little.
|
Originally Posted by LEOPAJM
(Post 1796990)
I've been on your boat once this summer Scott ..... How did that seem to work out ??? :drink:
|
Originally Posted by MM1
(Post 2532609)
I put a pair of 1 inch shorter drives on a 2001 35 ft cig and they work great on the top end but are crap out of the hole. I am going to put spacers in them for the customer to get back to stock height. At least if you dont like them you can put spacers on them and the lower unit back to stock. The lowers will give more mph because they are more hydrodynamic. Good luck with yuor project I hope this helped a little.
|
| All times are GMT -5. The time now is 08:16 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.