head problem, haha
 

can't get my head to work, haha. i'm in my front yard cleaning up my ride and i can't get her to work. nasty water in the toilet bowl, push the flush button nothing, push the waist flush putton nothing, whats wrong, and no it's not a braker ?????????????????

93 cig top gun

Re: head problem, haha
 

The boat draws its water from the bottom of the hull. It has to be in the waterto flush

Re: head problem, haha
 

but won't the pump still run, shouldn't i still hear the pump????????

Re: head problem, haha
 

anyone??????? yea i know late on a friday night, i just wanted to know cause i work in the a.m. and i'm going out sunday, please help? also, if there is a blue tab in it how do i keep it from f$@#n up my boat since i'm doing this in my front yard????????????? HELP

Re: head problem, haha
 

Ck the fuses and make sure your circuit switches are "on". Sounds like a simple power supply problem. As a ditch effort run a hot wire to the switch.

Re: head problem, haha
 

I had the same problem in my 1990 Bullet. It had the original pump. I replaced the pump (and "Y" valve) and now everything works!

Good luck! :cool:

Re: head problem, haha
 

Pics of Craig's (Old School) Jabsco pump and valve.

I got the parts at West Marine. A one-hour job.

Re: head problem, haha
 

what am i missing? circuit braker under the wheel is good, cabin power is switched on, what else is there, what other switches?

Re: head problem, haha
 

Is there power to the switch ? The top button is your water supply pump. The lower is your macerator. I can not see the both of them being bad at the same time. I have saw fuses being fine but the retainers being corroded enough not to make the connection. Easy stuff first.

Re: head problem, haha
 

I had the same type of problem. I replaced the switches and ended up replacing the wiring, it had a bad ground wire. I could jump the pump to the fuse panel and it would run.