can't get my head to work, haha. i'm in my front yard cleaning up my ride and i can't get her to work. nasty water in the toilet bowl, push the flush button nothing, push the waist flush putton nothing, whats wrong, and no it's not a braker ?????????????????

93 cig top gun

The boat draws its water from the bottom of the hull. It has to be in the waterto flush

but won't the pump still run, shouldn't i still hear the pump????????

anyone??????? yea i know late on a friday night, i just wanted to know cause i work in the a.m. and i'm going out sunday, please help? also, if there is a blue tab in it how do i keep it from f$@#n up my boat since i'm doing this in my front yard????????????? HELP

Ck the fuses and make sure your circuit switches are "on". Sounds like a simple power supply problem. As a ditch effort run a hot wire to the switch.

I had the same problem in my 1990 Bullet. It had the original pump. I replaced the pump (and "Y" valve) and now everything works!

Good luck!

Pics of Craig's (Old School) Jabsco pump and valve.

I got the parts at West Marine. A one-hour job.

what am i missing? circuit braker under the wheel is good, cabin power is switched on, what else is there, what other switches?

Is there power to the switch ? The top button is your water supply pump. The lower is your macerator. I can not see the both of them being bad at the same time. I have saw fuses being fine but the retainers being corroded enough not to make the connection. Easy stuff first.

I had the same type of problem. I replaced the switches and ended up replacing the wiring, it had a bad ground wire. I could jump the pump to the fuse panel and it would run.