Cigs under 25 feet
#1
Thread Starter
Registered
Joined: Mar 2006
Posts: 638
Likes: 0
From: 30,000 Islands Georgian Bay Ontario Canada
I came across a gorgeous Cigarette at my local marina last weekend. It was in for work, but the one employee from the marina I was talking with didn't know the particulars of the model, saying that it was "from the 70's" and was about 23ft in length.
Is there a place (or even past threads) to get information on all Cigs made in the under-25 range (specs, models, years built etc). ?
thanks
Is there a place (or even past threads) to get information on all Cigs made in the under-25 range (specs, models, years built etc). ?
thanks
#2
#4
Thread Starter
Registered
Joined: Mar 2006
Posts: 638
Likes: 0
From: 30,000 Islands Georgian Bay Ontario Canada
Originally Posted by boatnuts
If it is from the 70's , it would be a 24 foot with teak decks. Noticed you also hail from the 30,000 islands. What marina did you see it at?
Are you from around the area?
#6
Thread Starter
Registered
Joined: Mar 2006
Posts: 638
Likes: 0
From: 30,000 Islands Georgian Bay Ontario Canada
Originally Posted by boatnuts
Have a cottage about 14 miles north of Penetang in the islands. Was the boat you saw white sidded with yellow highlights airbrushed towards the back half?
Are you up in Minicog or further North?
#7
Registered
Joined: May 2005
Posts: 210
Likes: 1
From: Georgian Bay, Ontario, Canada
I am a couple miles north of Minicog on the main channel. I believe I know the boat you are talking about. I heard earlier in the summer that it was for sale. I also have one of the 24 hulls that I have just finnished completely stripping to bare bones. Intend to completely refurbish (without teak decks) and repower.
#8
Thread Starter
Registered
Joined: Mar 2006
Posts: 638
Likes: 0
From: 30,000 Islands Georgian Bay Ontario Canada
Originally Posted by boatnuts
I am a couple miles north of Minicog on the main channel. I believe I know the boat you are talking about. I heard earlier in the summer that it was for sale. I also have one of the 24 hulls that I have just finnished completely stripping to bare bones. Intend to completely refurbish (without teak decks) and repower.
#9
Registered
Joined: May 2005
Posts: 210
Likes: 1
From: Georgian Bay, Ontario, Canada
A friend is building in the Musquash just below the first falls. Sorry to hear about the "ding" in the Freddy. My plan for the 24 (1971 model) is to put a Mercruiser 6.2 L / 383 stroker / 350 HP with Bravo 1 in after the deck has been rebuilt and the hull regelled. Will post a pic of it bare bones later. You can find me on the Muskoka Landing Channel where you will usually find a few Donzi's and a 25 Magnum (yellow/white) docked.
#10
Thread Starter
Registered
Joined: Mar 2006
Posts: 638
Likes: 0
From: 30,000 Islands Georgian Bay Ontario Canada
Originally Posted by boatnuts
A friend is building in the Musquash just below the first falls. Sorry to hear about the "ding" in the Freddy. My plan for the 24 (1971 model) is to put a Mercruiser 6.2 L / 383 stroker / 350 HP with Bravo 1 in after the deck has been rebuilt and the hull regelled. Will post a pic of it bare bones later. You can find me on the Muskoka Landing Channel where you will usually find a few Donzi's and a 25 Magnum (yellow/white) docked.



