Deck rail on new cigs!
#11
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
the flat rail on the cigs looks cool.........Due ya know where to buy the flat material to put one on....I just repainted my mag and cant decide if i want no rail or lifeline or new style rail
#13
Registered
Thread Starter
I was thinking the same thing. When I wax my deck it is like a skating rink and one slip and....
The rail is like a safety handle to grab onto just in case you need it.
The rail is like a safety handle to grab onto just in case you need it.
#14
Registered
Thread Starter
The material is probably 6061 aluminum rectangle that you can get from any material place that stocks aluminum. Just measure one from another cig and order a length then cut it to the desired length and put the holes in. The blocks that hold it up off the deck are probably alum too. Measure those and any shop can make you what you need for dust.
#15
Platinum Member
Platinum Member
Ktron,
Sounds like you are getting ready to build another boat. Are you?
After thinking about it, I'm not sure how I would build another boat. I would be torn about the rail, but would probably leave it off for aesthetics.
Sounds like you are getting ready to build another boat. Are you?
After thinking about it, I'm not sure how I would build another boat. I would be torn about the rail, but would probably leave it off for aesthetics.
#16
Platinum Member
Platinum Member
Join Date: May 2003
Location: newbugh ny
Posts: 2,177
Likes: 0
Received 0 Likes
on
0 Posts
i like the look without it but i would need it. to tell you the truth if i didnt have no i wouldnt have got a 4 in. x 4in. bruise on my thigh. but i like a waxed bow.
#19
#20