Cig Bullet GPS Mounting

Reply Subscribe

Thread Tools

02-22-2008 | 12:35 PM

#11

Steve_H

Guest

Posts: n/a

Quote:

Originally Posted by OldSchool

I have no idea. But....I made 2 of them in case I messed one of them up. Send a PM to Gripit, I mailed him the extra one. He can measure it for you!!

Craig

did he pay for the shipping cost or claim usps must of lost it and he never got it

02-22-2008 | 02:24 PM

#12

Cree

Thread Starter

Registered

Joined: Oct 2007

Posts: 25

Likes: 0

If you can do the measuring of the lexan plate it would be appreciated. My boat is in storage a state away or I would measure the available plate area. I would like to order an aluminum powercoated plate asap, to be ready for install. Thanks

02-25-2008 | 08:23 AM

#13

OldSchool

VIP Member

Joined: Dec 2001

Posts: 10,397

Likes: 402

From: Cape Coral, Florida

Quote:

Originally Posted by Cree

Cree,
I got your email about the antenna, Go to that thread that I posted and check post #94 to see where I mounted it on the dash. I went over to see my old Bullet and measure the lexan plate.....but there was still snow and ice on the cover. Next weekend on that. Sorry...
Craig

__________________
Happily retired and living in Heavens waiting room.

02-25-2008 | 09:07 AM

#14

Clay Washington

Registered

Joined: Dec 2000

Posts: 6,986

Likes: 0

From: Austin, Texas

Quote:

Originally Posted by OldSchool

If you guys just want to know the dimensions of the lexan mounting plate, say the word and I'll go over and see my old Bullet this weekend and measure it. The guy lives less than a mile from my house. Let me know...

WORD

02-25-2008 | 07:30 PM

#15

carter38

Platinum Member

Joined: Jan 2003

Posts: 2,496

Likes: 7

From: Oklahoma/GLOC

Here Cree

Check this out just got done.

http://www.offshoreonly.com/forums/s...d.php?t=178611

02-25-2008 | 08:49 PM

#16

Cree

Thread Starter

Registered

Joined: Oct 2007

Posts: 25

Likes: 0

Thanks for checking and posting your pictures. Pics very helpful.

03-03-2008 | 02:30 PM

#17

Cree

Thread Starter

Registered

Joined: Oct 2007

Posts: 25

Likes: 0

I went with the Garmin GPS Chartplotter 430. The surface mounting kit will not require a fabricated plate (to make up for the existing hole being to large.) The existing hole (previously for the compass) is small enough, to cut for the surface mounting hole requirements. Thanks for all the information.