|
Oh boy sommer..... I dont think Bill owns the beast ;/ you know what I mean.......He dosent like to talk about it.... I dont know if I have pm privleges yet but if you can pm me.....Thanks for the tip! I dont have pm but will get it in a couple of hrs....
|
Vintage38, where in Maine are you located?
|
Damariscotta, near Boothbay harbor...
|
Originally Posted by vintage38
(Post 2523870)
Afternoon fellas, I think I stumbled onto the holy grail of powerboat gold, there is so much info here that at this point I have thoroughly overwhelmed and confused myself. I've been poking around for a couple of weeks now searching for information about a boat that I have had reciently surveyed and am planning on buying depending on dyno runs and final inspection. Question: dose anyone know about or have info on this boat? I have been in contact w the owner and he has been very helpful, just looking for a second opinion Doctors....
http://chicago.craigslist.org/chc/boa/637319598.html Thank you all for your help. I hope to be w u a while..... |
Originally Posted by Downtown42
(Post 2524963)
Is that by chance Russ SR1's rig??
Mark |
MrCIG, your boat is sick!! It looks great, I saved a pic I found on here and set it as my desktop screen saver. The pic is you running at a good clip side view out of the water lowers and all!! What a beautiful boat.. What are you running for power, trans and drives? OOps never mind, I found that pic and some more when I just searched for "38 flat deck" on here. Looks like konrads and BBchevs.. Very nice..
|
Thanks Vintage. I love the boat it's not real fast but it has a great ride. The motors are 515 cu.in with Brodix aluminum heads. Konrad Drives and Beefed up Borg Warner trans.
Mark |
Oooo, what mods have you done to the Borg Warners? Also, thats not a factory swim platform is it? I was thinking about one and wondering if I would go old school or just a white/red powder coated aluminum one. Now I think it would have to be nothing but mahogany and stainless, sharp!
|
Nope not mine. I'll probably go to the grave with mine.
Anyway Dave I'll be up by you in Reefpoint this year. Mark how you doin??? Say hey to Jimmy for me. V38 You love it as long as your not thinking your buying a ride that won't need to be wrench all the time. These flatties are not new boats and it takes a lot of work to make them look and run like Mr.Cig's or Fox Hunter or mine. Good luck |
Russ, Good to see you back on the board. Hopefully we see you this summer. I will definetly tell Jimmy you said hi. He checks the board maybe once a week but doesn't post. All is well here looking foraward to summer..
Russ is right these are not turn key boats. Takes lots of time and $ to keep them going. If you like to run them the way they are built to run. Mark |
| All times are GMT -5. The time now is 08:39 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.