Can't recall off the top of my head.

I will check next time I pull my cover off.

This works good.!!

Just bought it !!!!
2 gallons !!

Thanks
Mike

I'll just hope the flush button works ....

that's the only question to know !

the macerator works !
I don't know the flush works too :hitfan:


how do you use it ?? just putting it into the head ?

Thanks CIG3, had some questions and found this in the search feature about the head plumbing.

The head in our boat has not been used in years. I was gaining water in the bilge while underway. Turns out I had a bad water inlet sea cock for the head and the holding tank had been removed years ago but the head outlet had never been plugged. She was shipping water into the bilge!


Kurt

Funny you brought this to the front. I have been chasing a leak in the bilge for most of the time I have had the boat. Pulled engines/drives/transom assemblies and replaced everything.

Finally realized after all that that the toilet was leaking. Fixed the leaking hose only to have the pump start blowing fuse - luckily this thread shows the pump plumbing and I can most likely just replace the Pump and solve the problem.

Thanks...