Brace Yourself, do you have any other sweet pics of your 46? That is one sexy machine!!! Have your 1075s been reliable (I know you just had them freshened by Merc)?

Very reliable. Just add fuel. Zero problems with the engines. 100 hours logged so far since I bought the boat. 35 hours since mercury rebuild.

Credit goes to Mercury for these,........but may help if you need them.


Jon

brace yourself, thats one of my favorite RR. I am going to make it staggered. The engine bay look like the normal size but I will make sure before I start cutting. Iam going to have to move the outside stringers ( they are to far from the center stringer.

Pic when my engines were out for refresh and props turn in. Good luck on your boat. It's a great hull and you will have a gem.

Jeremy, that is one beautiful painted 46 ya got there. :drink: I've never seen a 46 that had the props turning out, they all turn in. I believe the 29's will be about right with 850 hp. Take a measurement of the engine compartment, or just measure the bottom of the hatch. You might want to call Cig to get the proper measurements for the stringers, or we can measure a few of them ourselves. :grinser010:

Good luck, keep us tuned in, and if ya need any advice, just ask.

Thanks for the additional pics BraceYourself. Again, beautiful boat!!

Thanks for all the info guys, I will keep you posted on the project when we get rolling on it. Also what gear ratio are you running in the 6s. Thanks

In the few I've had contact with were all 1.50

Most do but the 39 Cig's turn out.

I love the restored 42 Revolution!!!! Good luck with the 46RR, can't wait to see the finished product!!!!