Is this right????
#1
Registered
Thread Starter
Join Date: Mar 2008
Location: Jupiter, Florida
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Is this right????
This is the bolster mock-up for my Cafe Racer. I was told that they confirmed measurements from a 38 and a Playboy prior to fabrication, but, do they really have that much of a cant towards the back like that?
#5
Registered
Join Date: Dec 2006
Location: Merritt Island, FL
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
pics
Couple of pics of mine. Definitely a cant to the frame which translates to the bolster when mounted. The original Mistress bolsters and frames had no cant at all. I can take measurements if it would help.
Last edited by bustedbrick; 09-13-2011 at 09:22 PM.
#10
Registered
Thread Starter
Join Date: Mar 2008
Location: Jupiter, Florida
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
This was from a thread a few weeks ago......
http://www.westcoastoffshoreunlimite...-bolsters.html
If you follow the link and look at they're photos...........they don't appear to be canted.
I don't know which one is right! Some are canted, and some aren't..........................
http://www.westcoastoffshoreunlimite...-bolsters.html
If you follow the link and look at they're photos...........they don't appear to be canted.
I don't know which one is right! Some are canted, and some aren't..........................