Anyone ran P5x props on a gladiator
10-13-2010, 12:37 PM
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: Dallas Ga
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Anyone ran P5x props on a gladiator
Tring to get some prop info on this boat. I have 6 blade herrings and want to settle down the asss of the boat. It gets loose over 100mph.
10-13-2010, 01:02 PM
#2
VIP Member
VIP Member
Check with Brett at BBlades, but from what I have been told, more blades make for more stern lift. or may want to check with Herring/Ben Robertson.
10-13-2010, 01:52 PM
#4
Registered
I would try 5 bladed Herings
10-13-2010, 08:42 PM
#6
VIP Member
VIP MemberJoin Date: May 2002
Location: Central Illinois
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
Got a set of p5s. They were on a slingshot with 700 plus a side with a 1.5 gear ratio. They are labbed 31s. Were not on the boat very long and in perfect condition. PM if interested.
Ben
Ben
10-14-2010, 08:51 AM
#7
Registered
Join Date: Sep 2003
Location: Newport, MI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Try driving the boat a little longer and get the feel for it and you might figure out how to make the stern settle down... in the end you might save $$$ on props.
10-14-2010, 06:34 PM
#8
Registered
Thread Starter
Join Date: Aug 2006
Location: Dallas Ga
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I got ya good idea. I also just wanted to see if anyone with more expierence in the Gladiator had any good ideas.
10-14-2010, 07:48 PM
#9
Registered
10-14-2010, 09:30 PM
#10
VIP Member
VIP MemberJoin Date: May 2002
Location: Central Illinois
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
