Lil Red's Mistress project!!! (Repower/update)
 

Jamie caught the bug to go big or go home, bought the 35 mistress from smokin'gun, great guy very helpful btw
going to repower it with a pair of 511's 550-575 hp and update the dash. :coolcowboy: first off gotta stretch the trailer a bit !!! more pics later

Where's the Thread is Worthless without Pics!!!!!:lolhit::coolcowboy:

Mike I have a pair of motors that would drop right in the boat they are comeplet give me a call 519-818-6158

Jay I already have the 511s at the machine shop , what do you have and how much? Pm me if you want

:worthless_without_p:worthless_without_p:worthless _without_p

Come on, you guys kinow better then that post it up I love it another number 1

i havent uprgraded my membership so bug mike lol
as soon as the formula sells ill take a couple bucks from that and do it !!! until then im still eating peanut butter hahaha

U can always post them for free through imageshack. Upload to there and post link

Sam

PS- or email them to [email protected] i'll put them up

X2 :coolcowboy:

Come on man, post some pics!!

Heres the link to the motors that I have for sale http://www.offshoreonly.com/forums/s...er-motors.html

nice pieces! but a bit out of my $$$ range right now with the wedding coming up fast, or until either the formula or rinker sells, want a boat in trade for them ? lol

Nice. Wasn't this Dan's boat from NJ at one point?

Maybe these engines are in your price range?
http://www.offshoreonly.com/forums/s...4-engines.html

454 330's might as well put a couple of 9.9 johnyrudes on that. We have a set of 502's at the engine shop right now.
-Mike

I was wondering if this was Chris' boat from NJ. Has #3's and a set of blower motors in it.

Panther,
If that is the boat you & I Had
spoken about a while back , Then
I still have the old add. And it had
a pair of 498's Chevy with 250 B&M
Blowers on them and dyno'd @ 630 H.P.
The add was from 06/15/2007 ......
Hope this info helps ????

C-Ya C.-B.

Yes its Chris's old boat NJGreatful

Very nice!!

This is gonna be a great build, keep the pics coming!

Not doing much till one of the others sells got too much tied up right now

Sweet boat looks great! I am sure Mike will make sure it is another Sutphen killer

nice project . . . keep the pics coming !

http://i1119.photobucket.com/albums/...09025269_n.jpg
http://i1119.photobucket.com/albums/...ali/mis209.jpg
http://i1119.photobucket.com/albums/...i/mis203-1.jpg
http://i1119.photobucket.com/albums/...63474386_n.jpg

Cool!
http://Lucididee.zenfolio.com/p112566285/ea66fe67

About 10 hours wrth of work and that boat fit snug as a bug on that trailer.
You bouys liek how we take'em off trailed strap it up on the lift and block the back off in under 10
-Mike

Thank god that part is over !

heres some more

Thanks Gordon !!

From what I keep reading that shouldn't be hard lol

What did you have to do to the trailer? Looks like you stretched the tongue?

Stretched the tongue added cross members made new bunks and moved the bunks

The front bunk were not placed rite and rotted so we remade the brackets and new wood and carpet we added another cross brace to the front, added a longer tounge
-Mike

Mike - I have a job for you in the spring after I launch. The trailer is designed for a TG and is too big for the Cafe, so it needs some mods. Based on this thread, sounds like you LOVE working on trailers!

No problem is it steel or aluminum? Either way we can move that back right to the hull.

Steel you can tell by the powder boat on it

Yep (and throw a little rust in there)

Looking at it from my phone couldn't see if it was white or aluminum lol

Congrats on the new ride.
looks like Mikey's got ya covered:drink:

thanks gerry!

Hey G yougoing to come down and help with this project also? It wont be a saber project but still a project :party-smiley-004:

Yes as long as we are installing turbines.

Have a set laying around we could borrow?

i will gladly set this thing up with turbines...... if someone else is paying lol