Nauti by Nature Cigarette 38 Top Gun Refresh!!
#131
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
#133
Platinum Member
Platinum Member
Join Date: Jan 2002
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
#134
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Ok! Spray Bars are done!! Joe at Fast Forward Performance just finished machining the blocks for them. Now all we have to do is run the oil feed line. If you look at the pictures you can see the -3 fitting in the block where we will pick up an external oil supply to feed the bars!!
Damn that is sexual!!
Another!
Damn that is sexual!!
Another!
#137
Registered
Thread Starter
Join Date: Jun 2011
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
I have everything back from Fast Forward!! Joe actually brought everything out to my house last week, I have just been really busy with work. I will start assembling the engine here shortly!!
Some of the parts Joe got for me below!!
Custom Diamond Pistons
20.6cc Inverted Dome Pistons!!
Accumulator Groove. Help stop ring flutter!
Double Pin Oilers! These pistons use Heavy Duty Spirol Locks (One lock the size of two normal locks) And we have .205 wall Pins!!
Some of the parts Joe got for me below!!
Custom Diamond Pistons
20.6cc Inverted Dome Pistons!!
Accumulator Groove. Help stop ring flutter!
Double Pin Oilers! These pistons use Heavy Duty Spirol Locks (One lock the size of two normal locks) And we have .205 wall Pins!!