Thanks!! They will be in the boat soon!

Here are the dyno print outs! They made within 1hp and 1ft lb torque in the average power!! We set the motors up to cruise at 4500rpm and the power is damn near identical!!!




Engine A
http://i1123.photobucket.com/albums/...ps2638de7a.jpg




Engine B
http://i1123.photobucket.com/albums/...psa266d0ff.jpg

Nice!! Where were they at prior to rebuild??

They were 850's

Wow, Nice gains!! You should pick up a few mph...
I only have 770..



Oh yeah and then divide by 2!!!! Lol

We played with them on the dyno a little bit... Put a wicked up tune into it and spun it to 6500rpm to see if we could break 1000hp... She stops around 975 with 8lbs of boost, still on pump gas!! Then we detuned them to 925's so they were 100% safe and reliable!!

forklift will be droped off at the house Friday morning!! Will be putting the engines back in over the weekend. Have a few details to iron out with my alternators and power steering pump but no big deal.

Here are a few random pics that didnt get posted while I was in a mad rush to get the engines built for the dyno date.


Heads, Intakes, valve train installed.
http://i1123.photobucket.com/albums/...ps696a8a0d.jpg





Lokar Dipsticks, Fuel Pumps & Regulators Installed
http://i1123.photobucket.com/albums/...ps34203b60.jpg

Great numbers, and build. Like I said in past posts, a video once the engines are in the boat running in the drink would be the icing on the cake.:boat:

I have some Herings for Konrads you need to try.

Jimmy I need to get up that way one day with Ron and check you place out, all I hear is good things about your boat from Ron. Looking forward to seeing it. We can do lunch one day. Joe Irwin