|
Originally Posted by mmb
(Post 3865220)
lol... OldSchool didn’t you just put new interior in?
|
By the way, GREAT project mmb!!! Thanks for posting it. Looking forward to following it the rest of the way!!!
Craig :) |
Great thread! Everything looks great!
|
Originally Posted by OldSchool
(Post 3865568)
Well... I bought a newer style (2004) backseat and put it in the boat and then took the boat to FLA to get the hatch (which was rotted) and new side panels made. That turned into re-doing everything. Gotta love these *&#$ing boats!!! :D
Tell me about it! Pulled motors to install SCXs- Now all new interior, several things in engine compartment geting fixed, new gimbals and helmets for drives, doing springs and lifters in motors, redynoing for smaller pullies!! Hoping that we dont need chillers-- then redo hatchfor scoops Gotta be Crazy cause IT never ends boys!!! |
Originally Posted by OldSchool
(Post 3865568)
Well... I bought a newer style (2004) backseat and put it in the boat and then took the boat to FLA to get the hatch (which was rotted) and new side panels made. That turned into re-doing everything. Gotta love these *&#$ing boats!!! :D
Mark |
Parts are starting to show up from Bob Madara from Marine Kinetics!! http://www.marinekineticsonline.com
Bob Spec'd all the valve train parts!! The Custom Cams should be in next week :evilb: All the valve train components from Bob! http://i1123.photobucket.com/albums/...ps386e02d1.jpg Isky 9000 Series Valve Springs http://i1123.photobucket.com/albums/...ps50a1a276.jpg Morel 4603 Hyd Roller Lifters - (Cam Motion) http://i1123.photobucket.com/albums/...ps8334b7a7.jpg Pac Racing 10 Degree Light Weight Chromoly Retainers http://i1123.photobucket.com/albums/...pse434c879.jpg Pac Racing 10 Degree Chromoly Locks & Comp Cams Valve Seals! http://i1123.photobucket.com/albums/...ps5173f05f.jpg |
Few pics from tonights session!
Blowers apart clean and ready for new bearings & Seals http://i1123.photobucket.com/albums/...ps62334c73.jpg New Bearings/Seals and Teflon Strips. (Before you get gung ho about replacing your strips you have to have a way to turn the teflon down to get .005" clearance from the rotor to the case) http://i1123.photobucket.com/albums/...ps263cc448.jpg New Gaskets http://i1123.photobucket.com/albums/...psb1e1e1e0.jpg |
Blower cases look brand new still!!
http://i1123.photobucket.com/albums/...psb43bb206.jpg The only parts (besides bearings) that needed to be replaced were the couplers.. I bought new ones from the blower shop. http://i1123.photobucket.com/albums/...ps95ba3f31.jpg New Couplers http://i1123.photobucket.com/albums/...ps0648a032.jpg |
Rebuilt the Snout with new bearings and seals!
http://i1123.photobucket.com/albums/...ps4f1b075e.jpg New Blower Bearings & Seals installed. http://i1123.photobucket.com/albums/...ps12445a79.jpg Rotors installed http://i1123.photobucket.com/albums/...ps5e8a3473.jpg Bearings Retainers http://i1123.photobucket.com/albums/...ps670716eb.jpg Pay attention to this shim and what rotor it is on. This shim fine tunes the rotor timing and is VERY IMPORTANT!! http://i1123.photobucket.com/albums/...ps2d5aaeb8.jpg New ARP Pro Blower Gear Bolts!! Look for the timing marks on the gears, you can see the rotor timing here. http://i1123.photobucket.com/albums/...psbc694692.jpg New Coupler installed http://i1123.photobucket.com/albums/...psd8a8a3b6.jpg |
And now the fun part :lolhit: polishing them back up....
http://i1123.photobucket.com/albums/...psd575e19b.jpg New Star Washers for the 8mm Pulleys my buddy machined for me!! http://i1123.photobucket.com/albums/...ps846cc093.jpg Bling Bling!! http://i1123.photobucket.com/albums/...ps716fc74f.jpg |
| All times are GMT -5. The time now is 02:58 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.