Probably many many more brain cells from resin and Spraying imron in a poorly ventilated garage in the middle of winter as a teenager.::eek:

Ah what vid gotta see it

,,,,,,

Anyone know how much the cafe sold for? That is if it's sold??

you guys wouldnt believe me even if i told you :food-smiley-007:

check cleared and signed purchase agreement came in the mail this afternoon.. getting refreshed hawk power. newer trs. livorsi gauges and new dash. and who said i couldnt do this

Me for 1, so how's about answering the question rather than quoting me with your chest puffed out?

Phil where you been man? It's tough to pick on ya if your not here:evilb:

she sold for 50,000 with the boat finished. the market is not as dead as everyone says it is. not disclosing the buyer BUT, any of you NJ guys will be able to see this boat running next season down near Pro Boat in jersey.

tommy, oh ive been busy! schools catching up to me, leaves are blowing so fall clean ups for my landscaping clients have had me swamped for the past 2 weeks. and my building i had lined up for 2 months fell through on friday i guess the seller wasnt able to move out and buy the bigger place he was hoping for so ive been on the phone with many people looking at buildings to purchase. might even be building one but its too late in the season for that and i have 3 boats to build this winter not including the customers paint jobs! how have you guys been! seems like some of yall have settled in for winter!

So, you sold it for 50k, but you have to install two hawk engines (which come at an unknown cost), that need to be gone thru (theres 10 grand unless its gonna be a slop job rebuild). You need to install two newer TRS drives (3-4 grand), install new livorsi dash (ill say 2 grand), Really should rebuild the tranny's while they are out, (ill go 1500 there), and I'm sure theres a few more contingencies ....plus labor, .........

Glad you finally made the sale, . I'm just trying to see where the big profits are? Sounds like you sold a 30k boat that needs 20g worth of work, for 50g. I am looking forward to seeing the boat progress from its current state.

Ehh, oh we'll.. That's probably where you guys should just quit wondering. I have a very happy client whose very excited to get the boat who wants to throw more business my way. So I'm happy as well. And your right, there may not be huge profit in this one.. But at least I learned the lesson of loosing my ass on a build with out loosing my ass. First boat was a learning curve. I'm sure the top gun will throw me more curves. But we'll just take it with stride and keep doing them. And for the hawks and TRS. I had the motors and the drives from another boat. So I'm just going to put a value to them, which he agreed upon which is putting mercury power into the top gun. There's a lot of offsetting costs and selling and swapping going on here. But when it's all said and done it should be a good day for my bank account. But that could go south pretty fast who knows

Go get em Phil Hey did you spring your little brother yet .Maybe want to go check on him he looks like he is having a good time:evilb:

The BS continues.... he is making zero profit I don't car how he justifies cost, and buyer MUST be blind... or extremely uneducated about boats..post pics Phil lets see the engines and drives going into the boat....again like MT said, unknown engines being out into boat great idea.... I seen pics of that gun, the engines cannot look very good, there is a reason no pics.....

After finding out about and reading the Skater thread I feel even more justified calling you out, wish I knew about that one before lol

you are new new Glass guy gonna show up all the boat builders and how it's done...lol did you tell the new buyer about the gaping hole you cut in hull?

[ATTACH=CONFIG]531756[/ATTACH][ATTACH=CONFIG]531757[/ATTACH][ATTACH=CONFIG]531758[/ATTACH]


lots of cracks to fix never mentioned that extent! I feel real bad for the new buyer, I guarantee he was not shown this stuff.....hate me all you want, I hate scammers...

^^^^^^ What is that a picture of?

As the prop turn$:riding:

Apparently a big hole you cut the bottom of the boat and I highly doubt it repaired to the extent that should've been therefore that's a really good chance of sinking a boat right there and someone could lose a life this is the kind of work that he does that delaminate later from what I've read about his Jet skis Any other supporters you want to buy this boat and put their family in it go ahead

That poor guy... I guess we will be seeing another one of those I got screwed threads soon.

Explain to me again how this is any of your business? He has to provide evidence and pictures to YOU why??
The surveyer doesnt know what hes doing, the buyer who wrote the check is a moron but Fuc Face Mr. arm chair quarterback needs evidence , proof , pictures , and all the details, because ???????

I got an idea, mind your own fuc king business.

Awww you mad? Because I hate hacks obviously you are ok with it.... Don't forget to tell others to mind buisness.... Why you defend him if it does not effect you? Go mind your buisness dikface I hope you get fukked on everything you buy azzhole


I MUST KEEP FORGETTING THIS PLACE IS PUBLIC OPEN FORUM...OOPS opinions are all over this site fuk off dikbag

My condolences to whomever bought the pile of $hit.

Our biz is to make away and help our other boats out. Same reason you are after Scorpion 31 Keep everyone Honest and on the up and up. That's a big hole and improper repair can be disastrous. A 2 year paint warranty I hope means patch work also. Thats going to break

I must say if it sold for $50k that’s quite the impressive price….possibly a record for a TRS Café in 2014? Apparently a TRS FlatDeck with recent engines, steering, etc (no trailer) sold down my way in the low 20’s and there’s a few other local Café’s (some Bravo) for sale with a starting price well below $50k. There’s a lot of good price options out there so they must really have liked the boat

ATTENTION ALL CIG OWNERS:

please send all documentation of any projects you have going on to Fuc Face for approval.
This is your final warning!!

This thread is awesome..... lol

Who's FUC FACE? I'm looking to join the Cig arena with a 38' #6 Gun

Cuz why would you buy this one for 54k http://www.offshoreonly.com/classifi...o58813-en.html
Or fox hunter for 49, when you can have an upstate powerboat "60 mph" edition

As I said before this sh!ts like crack!!!! 200 pages off bashing each other here we come

I'm just board and I enjoy being the azz hole. I take pride in being a Dik. Ask anyone who knows me.

I would be all over both of those boats if I had more than 37 dollars in my budget for a new boat.The big problem I see with the 90mph Cafe is where it says Nav lights work 50 % of the time .Big turn off:evilb:

Holy Crap you guys are a little HiStrung when you don't get go boating anymore. I think a few of you should by doctors orders for your blood pressure move to Florida and cure it

Dude, its getting big power 525 HAWKS installed. Get it right, its an upstate powerboat 65MPH edition for 50 grand. Why would you bother with a fully restored tastefully done Cafe with speedmasters and Brad smith 632's

50% is still better than Phil's lol

Attention all boaters Icdedppl likes cock in his mouth... Lol

That's me, he is obsessed with me and and my opinions...

Now I know why we get along haha

Holy F-ing crap!

I don;'t believe that is a repair that Phil did on the Cafe or he would showed us his fiberglass skills in this thread.

Hey FF and Icdedppl lighten up guys

I don't know man.

Looks like the same bottom and angle of shot he took before of the cracks underneath.

I think it's still the same boat #1.

#2, judging by his other repairs / non repairs I will say that I wouldn't trust his skills fixing that hole.

IMHO.

[QUOTE=tommymonza;4211604

Hey FF and Icdedppl lighten up guys[/QUOTE]

I never have once said a negative thing about him on his threads, or poked at him about anything else, I only respond when he fuks with me... Never ever have I started chit with him....

If this is true why would you cut it out from the bottom like that. Hell if I had a hole like that I doubt I would trust me own repairs.

FF:
http://i205.photobucket.com/albums/b...ps0123e5c2.jpg