Originally Posted by 315duramax (Post 4203053)

nope, pulling the 525's from my top gun, putting those into the cafe. im buying a set of #3's and all the parts. then grabbing a set of 500's to go back into my gun. but hey! why should i bother posting anymore lol

Originally Posted by Sick Stinger (Post 4203025)

Actually I just nailed down a deal with Yamahas 35 check has been sent. Please call my bluff and say it's all bull that I was just messing around and was using " I have a friend" line just to f with you.
As for the guy flying out, 1st 3 didn't buy it so 4ths the nieve one, highly doubt it. And he is going to pay you upfront in full for the concert and motors? If he sees the boat with his eyes open and wants you to RECUT the transim for 3s , wait you don't have to do glass or cut the transom for a trs to # drive swap from what you said. But once again wrong. Please keep us posted in this 50k price tag with hawks and 3s hell I'll sell you my blower motors for 15K tell your buyer that he can do fresh 600sfor the same your sweet 525s are

Originally Posted by tommymonza (Post 4198846)

OK enough beating up on Phil

Phil I am sure you are a good kid you just lack at least on this site manners respect and humility. You can argue that all these middle aged knowitalls on here started it but it all boils down to you .

So go Forward . Your a hard working kid with some paint talent. Concentrate on that and drop the full restore dream for now.

Pull your Ad until you fix the things on the boat and than read some other professionally written ads and duplicate theirs to write yours. Drop the Upstate Crap But do state what you as an individual did to the boat.

Spend a weekend and get the trailer painted and state truthfully what you did to it and what it may need in the ad if it does need further work.

Pull this Thread,

Come back on this Site with a little humility and treat the other members with respect and i am willing to bet this is all water under the bridge and even the naysayers would be willing to give you a hand when needed .

Just my 2 cents

Originally Posted by tommymonza (Post 4203118)

SOOOO this new buyer is going to have Phil who admits through his current posts having some one else do a simple engine reinstall on the Cafe and if you read on his earlier queries on threads that he started that he has not a Phukin Clue what is involved in the installation of a stock motor and drive and now he is going to reglass a transom and stringers for 3s and rig them.

Phuck some one go on Amazon and see if we can get a OSO deal on Popcorn.

This is going to be Good

Originally Posted by Full Force (Post 4203127)

Well, we must be wrong because Phil said somewhere apparently that the transom does not need redone, so any idiot knows you can just swap a TRS and a #3.... DUH!!


I need to place order for Popcorn.

Originally Posted by 88bullet (Post 4203129)

the same cutout hole works. gotta plug the old trs mount holes. got a gun in the shop right now that had the swap done to it. actually works pretty well.