Big project but it will be well worth it.

Amen

Fun project right? I have the cabin out of my 38 flat deck now.
I'm cutting all new panels in 1/4 ply then sealing to block
any moisture from invading the wood. I had a hatch leak that
messed up the cabin pretty bad. I always wanted the fabric out of the
cabin anyway. Don't know what I want to do for lighting however
I do know I want LED.

Here is what I did for the lighting, they are LED's.

My thought was to eliminate most of those lights on the swivels. I have run my head into them far to many times. I was thinking of adding a detail to the corner of the sidewall and headliner to hide led rope for indirect lighting. I'll keep a spot over the cooler/sink, one to match on the other side maybe a couple readers on the bulkhead.

While you have it gutted look very close at any support and bulkheads for integrity. I found a bunch of areas that needed to be glassed back in.

Here are a few update pic's still trying to wrap this project up. What a pain in the A$$ it was!!

Lip-Ship made the panels for me.

Did Innotech do the carbon fiber? I need to have the radio bezel done in mine and have been toying with doing the carbon to match the dash in mine.

nvm... I just saw you posted Lip Ship lol

If you want the logo on there you have to go through Lip-Ship.

I've been on the Lipship site ever since I picked up the Bullet. Picked up a few small things and have looked at the LED's to replace the old style lights. I def need the radio bezel since the one on there has an extra cut for an EQ that isn't used.