ICDEDPPL

iTrader: (1)

Ditch the 8-71`s for stage 4 10-71`s






Takem em down to short blocks






35hours of combustion chamber work on the heads by High Flow Heads in Alsip Illinois (A++)
Replace bolts with head studs.







Set us a proper valve train from scratch.







Spring oilers:



IMI starters:

ICDEDPPL

iTrader: (1)

Complete rewire







Every ignition part replaced and switch from MSD to Crane





Every piece professionally polished and top coated with DURAFORTRESS top coating to lock in the shine and protect the finish.








Eliminate cheesy K&N breathers

ICDEDPPL

iTrader: (1)

Before and after blower intake temp sensors/gauge









Add a bunch of warning sensors and lights:
















Bright as hell!

cigrocket

iTrader: (3)

Nice work, looking good!

ICDEDPPL

iTrader: (1)

Chemically removed chroming and had tabs polished and DURAFORTRESSED










Added Anode:








Added Drive switches to rear of boat (not tab)





Dry Exhaust:

eightsecmopar

iTrader: (1)

Nice job Dan,!!
I like the warning system, would be kind of hard to miss those warning lights!
So with those new blowers you should probably be around what 550 hp?? Lol.... Oh I forgot you did some porting so maybe 575hp
Looks Awesome, hopefully see you on the lake soon

ICDEDPPL

iTrader: (1)

Dynoed motor








Replace most hoses, fitting , fasteners, damper plates..etc..etc.. tons of little stuff.
Get all fancy with torsion clamps and other weird stuff.





Replace all leaky expansion bottles on transom





Paint the bottom black to camouflage all stains






Going back in hope to be in the water soon:

jeff32

wow! that's clean!

abmotorman

You've been busy but where's the on the water video? Looking great. Dry exhaust - should be able to hear you from miles too.

Zero Patience

Great work, and planning.