Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Cigarette (https://www.offshoreonly.com/forums/cigarette-32/)
-   -   08 38 top gun (https://www.offshoreonly.com/forums/cigarette/332732-08-38-top-gun.html)

Drake22.250 11-25-2015 06:06 PM

08 38 top gun
 
http://www.offshoreonly.com/classifi...un-o64009.html
What's the story? Damn shame.:eek:

Chest Rockwell 11-26-2015 08:29 AM

Was wondering the same thing.

soggy bottom 11-26-2015 09:36 AM

At a ninety five thousand dollar starting point, what is the least one could be into that boat with basic 525s, bravos, and labor.

Dean

Interceptor 11-26-2015 10:26 AM

Money pit

thisistank 11-26-2015 10:37 AM

In my humble opinion, this would be a decent deal for someone that would do all the work themselves and had a connection to getting stuff or even had some parts / motors already.

You're talking 30k minimum for power, 10k - 15k minimum decent drives and assemblies, but then you're going to get nickeled and dimed for all the little stuff to rig it (guessing 20k). So you're roughly 60kish before installation. If you have to get someone to do it stand by for the labor bill!

Great looking boat. Best bet would be for the shop selling it to rig it and sell it ready to go since they have dealer cost. Same thing I think it was pier 57 did that with the Mercury test cig: tried to sell it derigged but after sitting on it just put it together and sold it whole.

soggy bottom 11-26-2015 10:41 AM

Perfect opportunity for a Arneson conversion.

Dean

cigrocket 11-26-2015 05:41 PM

Hard pill to swallow when their are 2 42xs listed an 05 and an 07. The 05 is being sold at 185k. And the 07 is at 215k. And that's what they are asking. I think this gun would definately cost you 200k when all said and done but it could be more. Parts aren't cheap, boat restorations take time which is valuable. Plus you could buy one of the 42 and go boating next week instead of 2 years from now,......lol. I think it would be a good deal at 60k. Or rig it at least with ransom assemblies......lol

CigaretteSam 11-26-2015 06:19 PM

If i'm not mistaken, that boat is the one in this Rick Ross music video.

https://www.youtube.com/watch?v=dkJv9ElFR-c

baronmarine 11-26-2015 07:07 PM


Originally Posted by CigaretteSam (Post 4379980)
If i'm not mistaken, that boat is the one in this Rick Ross music video.

https://www.youtube.com/watch?v=dkJv9ElFR-c

nice transom!

todd

315duramax 11-26-2015 10:32 PM

it seems like it hung out with kid apache for too long...

but i laugh when people say youll have 20k for nickel and dime lol someone who has connections could do it very reasonable. it just all depends whats missing. of course if you buy all brand new merc stuff sure.... im curious who will step up and buy it. but like cig rocket said, at 60k i think is where the number real world is


i love the color and the paint and interior.

genob 11-27-2015 05:49 AM


Originally Posted by CigaretteSam (Post 4379980)
If i'm not mistaken, that boat is the one in this Rick Ross music video.

https://www.youtube.com/watch?v=dkJv9ElFR-c

he needs to find the trim button:cartman:

flatlanderbill 11-27-2015 06:57 AM

Sorry I opened that video link! Nice boat , hard to imagine how it would end up like it is.

ham_r_down01 11-27-2015 07:49 AM


Originally Posted by Drake22.250 (Post 4379737)



Originally Posted by soggy bottom (Post 4379907)
Perfect opportunity for a Arneson conversion.

Dean


I know a guy with a set of arnesons still on the pallet. 2 fresh bullets too. :lolhit: I think he needs another project.

F-2 Speedy 11-27-2015 08:22 AM

I haven't heard the N-word and MFr's used that much sense Eddie M- RAW.............kinda surprised it surfaced on this board,

thisistank 11-27-2015 10:56 AM


Originally Posted by 33outlawsst (Post 4380093)
I haven't heard the N-word and MFr's used that much sense Eddie M- RAW.............kinda surprised it surfaced on this board,

I actually listen to rap frequently. But that's a horrible "song".

Drake22.250 11-27-2015 11:19 AM


Originally Posted by ham_r_down01 (Post 4380086)
I know a guy with a set of arnesons still on the pallet. 2 fresh bullets too. :lolhit: I think he needs another project.

Set of 525's, 598's, 502's & Arneson Conversion, Bravo 1's with Imco boxes, ITS XR set up too... Yea I'm messed up.....

smokin' gun 11-27-2015 11:55 AM

luv the guys that say 100 k to rig it .im trying to make a deal on it as we speak ..ive got a pair of drop in 525s transoms and drives .,and I own it all short $$$ .. once again a guy that has a ratted out boat with nice power could move up to a nice 38 cig easily on a weekend ,,why all the nay sayers ,,I agree its priced high but gotta start somewhere...if you are capable of turning a wrench its really not a bad deal

thisistank 11-27-2015 02:03 PM


Originally Posted by smokin' gun (Post 4380141)
luv the guys that say 100 k to rig it .im trying to make a deal on it as we speak ..ive got a pair of drop in 525s transoms and drives .,and I own it all short $$$ .. once again a guy that has a ratted out boat with nice power could move up to a nice 38 cig easily on a weekend ,,why all the nay sayers ,,I agree its priced high but gotta start somewhere...if you are capable of turning a wrench its really not a bad deal

I think that's exactly what I and everyone else said. I don't see any saying 100k to rig it.

YOU are the perfect customer for this boat. Motors on hand, capability to rig yourself.

Drake22.250 11-27-2015 03:09 PM

Started thread just hate seeing nice things like this neglected or in this shape. (To nice of boat) Smokin hope you can bring it back! Good luck!

shepnic74 11-27-2015 04:04 PM

Don't forget the couple grand for a new swim platform to. Such a shame someone would do that to a beautiful boat wonder what the story was???

jbraun2828 11-27-2015 05:41 PM


Originally Posted by shepnic74 (Post 4380182)
Don't forget the couple grand for a new swim platform to. Such a shame someone would do that to a beautiful boat wonder what the story was???

Try about 6k for a new platform hahah

thisistank 11-27-2015 05:45 PM


Originally Posted by jbraun2828 (Post 4380203)
Try about 6k for a new platform hahah

You can see how quick you can get nickeled and dimmed to 20k. Exhaust, props, resivuours, pumps, motor mounts, etc. etc.

smokin' gun 11-27-2015 05:45 PM


Originally Posted by jbraun2828 (Post 4380203)
Try about 6k for a new platform hahah

ive bought many for a grand ..see what I mean

smokin' gun 11-27-2015 05:48 PM

:)

Originally Posted by thisistank (Post 4380161)
I think that's exactly what I and everyone else said. I don't see any saying 100k to rig it.

YOU are the perfect customer for this boat. Motors on hand, capability to rig yourself.

ya go over on face book its advertised there also ..guys getting quotes for motors and drives 60 k 70k as much as 100 k with drives and transoms make me laugh

Interceptor 11-27-2015 05:52 PM

Trailer looks short

jbraun2828 11-27-2015 05:58 PM


Originally Posted by smokin' gun (Post 4380206)
ive bought many for a grand ..see what I mean

I'm talking about oem platforms not some all tubular universal thing that doesnt look right

F-2 Speedy 11-27-2015 06:05 PM

Good luck SG, hope you score

jbraun2828 11-27-2015 06:12 PM


Originally Posted by smokin' gun (Post 4380208)
:)

ya go over on face book its advertised there also ..guys getting quotes for motors and drives 60 k 70k as much as 100 k with drives and transoms make me laugh

I would think 50k would get you some 525's and xr's. Have you seen the boat yet? I wonder about condition on the paint and interior. Completed I would think the boat should be worth 180-200k, so you have some room to work. You know what your doing, good luck I hope you can make a deal.

shepnic74 11-27-2015 06:37 PM

Still would love to know why/who stripped it in the first place

ICDEDPPL 11-27-2015 07:36 PM

It`s the little stuff that kills you. I look at my REDHORSE bill and think 'Jesus I have all that just in some AN fittings and hose? '
:picard1:

Brandonb_05 11-27-2015 07:49 PM


Originally Posted by shepnic74 (Post 4380182)
Don't forget the couple grand for a new swim platform to. Such a shame someone would do that to a beautiful boat wonder what the story was???

Biggie smalls must have stepped on the swim platform and broke it off during filming

F-2 Speedy 11-27-2015 08:04 PM

Could of been a bank repo and it got stripped before they got it back, their was another T-step in a similar condition that sold a year or so a go out of Florida

1MOSES1 11-27-2015 09:37 PM


Originally Posted by smokin' gun (Post 4380208)
:)

ya go over on face book its advertised there also ..guys getting quotes for motors and drives 60 k 70k as much as 100 k with drives and transoms make me laugh

Nice used 525's fetch 25-30. Used XR's are what 8k each. Transom assemblies in decent shape are 2500 each. I just calculated 60k for bare minimums. Dont see how this is far off...it would be a shame to put used abused hardware in such a nice boat. If the hull sells for 90k, it an easy 150k-160k all in boat plus man hours to put it together.

315duramax 11-27-2015 09:38 PM


Originally Posted by 33outlawsst (Post 4380093)
I haven't heard the N-word and MFr's used that much sense Eddie M- RAW.............kinda surprised it surfaced on this board,

i was jw how anyone actually watched that video. payed enough attention to remember the boat AND make the connection lol

4195 11-28-2015 07:35 AM


Originally Posted by 1MOSES1 (Post 4380288)
Nice used 525's fetch 25-30. Used XR's are what 8k each. Transom assemblies in decent shape are 2500 each. I just calculated 60k for bare minimums. Dont see how this is far off...it would be a shame to put used abused hardware in such a nice boat. If the hull sells for 90k, it an easy 150k-160k all in boat plus man hours to put it together.

Plus exhaust and steering. There is another $12k

smokin' gun 11-28-2015 06:12 PM


Originally Posted by 1MOSES1 (Post 4380288)
Nice used 525's fetch 25-30. Used XR's are what 8k each. Transom assemblies in decent shape are 2500 each. I just calculated 60k for bare minimums. Dont see how this is far off...it would be a shame to put used abused hardware in such a nice boat. If the hull sells for 90k, it an easy 150k-160k all in boat plus man hours to put it together.

ahh what do I know ...maybe im wrong not worth it ,,I do know though I have a nice set of drop in 525 efis complete w exhaust .plus a set of xr drives and a set of hp gimbles .and I know I have way way less in them than 60 k maybe I got a deal ??? I do know im lookin for a place to putem though

1MOSES1 11-28-2015 06:35 PM


Originally Posted by smokin' gun (Post 4380477)
ahh what do I know ...maybe im wrong not worth it ,,I do know though I have a nice set of drop in 525 efis complete w exhaust .plus a set of xr drives and a set of hp gimbles .and I know I have way way less in them than 60 k maybe I got a deal ??? I do know im lookin for a place to putem though

maybe you got a deal on your stuff...but in general people want good money for things that are in good shape. i know I do. The prices I listed above are about going rate for nice hardware.

smokin' gun 11-30-2015 06:54 PM


Originally Posted by jbraun2828 (Post 4380203)
Try about 6k for a new platform hahah

swim platform is with the boat .as well as motor plates all pumps and hatch assembly is still in it as well as sea strainers .hell even the batteries are still in it .boat was seized by the fbi

donzi matt 11-30-2015 07:04 PM


Originally Posted by smokin' gun (Post 4381036)
swim platform is with the boat .as well as motor plates all pumps and hatch assembly is still in it as well as sea strainers .hell even the batteries are still in it .boat was seized by the fbi

You should buy it.

315duramax 11-30-2015 10:47 PM

^^^ he did LOL hes gunna make some money on that boat. so many people think things are so much more expensive than they are lol


All times are GMT -5. The time now is 09:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.