End of the road.... bought a 1987 Hawk Gun!
#242
Registered
iTrader: (3)
Did a quick dyno sim for tim.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
#244
Registered
#245
Registered
Join Date: Aug 2017
Location: Tucson AZ/ Sitka AK
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Did a quick dyno sim for tim.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
what software are you using.
#247
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
The few sheets joe did for me earlier showed a 13hp gain from 5000-5500, not even worth effort of a prop change, I think this boat is still set up the way it left Cig/Hawk so it’s seeming to be spot on with what it is supposed to
#248
Registered
Did a quick dyno sim for tim.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
merlin 345 flow file
10.6:1
254/254 114lsa .595/595 lift flat tappet cam
single plane
dominator
The low lift cam and mediocre head flow seems to be the limiting factor. More lift would help it breathe at higher rpm. Or better heads. The duration is in range imo.
#250
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Well, now that halloweeen on islands is over I will say I’m done for season, was going to possibly go but 42 degrees and rain just isn’t fun to me...
been a a great season, went boating every weekend from beging of may, until beginning of October, I can’t conplain...
one engine issue that i fixed in July, now need to freshen other engine heads so I don’t have that again, cleaning and painting things this winter making more details nicer.
It does feel good to put boat away on my terms.