SCX or SCX-4
#31
Thread Starter
Registered

Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
#32
Thread Starter
Registered

Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
unfortunately you can’t tell much from those pictures. Even with a great pic it’s almost impossible to tell. Everything needs to be leveled, a pic from a random angle just doesn’t work.
#34
VIP Member

Joined: Nov 2002
Posts: 4,176
Likes: 333
From: ankeny,ia.
PBC had the purple 39 center steer for sale 7 or 8 years ago, it had 525’s, I was looking it over pretty good, I do recall the drives being very high, probably only an inch or so below the bottom, I would imagine yours would be in the same neighborhood
#38
Thread Starter
Registered

Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
#39
Thread Starter
Registered

Joined: May 2009
Posts: 3,895
Likes: 124
From: Chicago, IL; Onekama, MI
I quickly eyeballed mine when I looked at it, and the drives appeared very close to being even with the hull. However without a straight edge, it's really hard to get an accurate guess.
#40
Registered

Joined: Oct 2007
Posts: 1,465
Likes: 210
From: Grand Haven, MI
I would measure mine for you but the drives are not on the boat. I would definitely run big props on your boat if possible. The difference between them and bravo props is night and day, especially on Lake Michigan. Mine also sucks to get up on plane even with big props, I have 17/35 herrings




