Carpe Diem getting some Whiples.
The following 2 users liked this post by Quinlan:
endeavour32 (11-24-2020), ICDEDPPL (11-24-2020)
The following users liked this post:
ICDEDPPL (11-24-2020)
The following users liked this post:
ICDEDPPL (11-24-2020)
#15
(BTR chicago) Who dis?
Hogie, I`m trying to run the same boost or maybe a bit more (8-9lbs)
Trying to figure out what pulleys and belts I need now.
Whipple says run it 1-1 but that seems low to me . I was 4% over on the Roots .. I`m thinking Whipples need more rpm but I don`t have a starting point .. maybe I`ll try 10% over and go from there.
Hogie, I`m trying to run the same boost or maybe a bit more (8-9lbs)
Trying to figure out what pulleys and belts I need now.
Whipple says run it 1-1 but that seems low to me . I was 4% over on the Roots .. I`m thinking Whipples need more rpm but I don`t have a starting point .. maybe I`ll try 10% over and go from there.
Last edited by ICDEDPPL; 11-24-2020 at 08:41 PM.
#16
Registered
I am friend of Brandon ( Panty Dropper), Shawn (Without Permission Top Gun) and Jimmy (Sonic).
I have Formula Fastech. We meet briefly few times this summer. My Instagram is Home and project.
I have Formula Fastech. We meet briefly few times this summer. My Instagram is Home and project.
#17
Registered
Looks awesome, I really like the hi tech modern look of them in white with the red. You followed the theme throughout your boat the attention to detail really shows.
The following users liked this post:
ICDEDPPL (11-25-2020)
#20
Registered
it will be harder to get the roll with the whipple because of the bypass but that button changed how the idle stabilization pid control was handled in the ecu. It will be possible If keep if he wants to.