Originally Posted by Full Force
(Post 4780348)
DefaultWhen you get screwed in a set of 3A pins and can't find others, you make your own... glad I got bud die who machine things! Kept outer as 7/8" so I can retain my saddles and bushings from SSMIII
https://cimg8.ibsrv.net/gimg/www.off...50418ebcf.jpeg |
Originally Posted by cigrocket
(Post 4783823)
n updated version of the Mercury Racing III SSM drive, the III-A SSM drive features larger vertical bearings in the upper housing. The larger bearings provide increased rigidity for the driven gear, resulting in increased bearing capacity and longer life. Larger driveshaft splines provide greater strength, while larger pinion bearings hold lower bevel gears more rigidly, resulting in increased bearing life. A larger propeller shaft increases drive strength and is rear loading for improved shaft contact with the propeller. An extended “nose” on the gearcase improves water flow and boat handling.
Features & Benefits Large driveshaft splines provide greater torsional strength. Large vertical bearing in the upper housing provide increased rigidity for the driven gear and longer life. Large pinion bearings hold lower level gears more rigidly resulting in increased bearing life. Large propeller shaft is rear loading for improved shaft contact with the propeller. Input ratings are 750 HP and up to 750 foot pounds of torque. Extended nose on the gearcase improves water flow and boat handling. I never had a problem with the 3A's and I had over 900HP. Plus the 26 Spline shaft opens up the book to better prop selection, more blades and dialing in versus hard to find 19 spline and or adaptors. I have 3's so I can't fully appreciate the upgrades |
Originally Posted by 1MOSES1
(Post 4783835)
are you concerned about stress risers in the necked down area of the new shafts?
|
Originally Posted by cigrocket
(Post 4783823)
n updated version of the Mercury Racing III SSM drive, the III-A SSM drive features larger vertical bearings in the upper housing. The larger bearings provide increased rigidity for the driven gear, resulting in increased bearing capacity and longer life. Larger driveshaft splines provide greater strength, while larger pinion bearings hold lower bevel gears more rigidly, resulting in increased bearing life. A larger propeller shaft increases drive strength and is rear loading for improved shaft contact with the propeller. An extended “nose” on the gearcase improves water flow and boat handling.
Features & Benefits Large driveshaft splines provide greater torsional strength. Large vertical bearing in the upper housing provide increased rigidity for the driven gear and longer life. Large pinion bearings hold lower level gears more rigidly resulting in increased bearing life. Large propeller shaft is rear loading for improved shaft contact with the propeller. Input ratings are 750 HP and up to 750 foot pounds of torque. Extended nose on the gearcase improves water flow and boat handling. I never had a problem with the 3A's and I had over 900HP. Plus the 26 Spline shaft opens up the book to better prop selection, more blades and dialing in versus hard to find 19 spline and or adaptors. |
Wish they still made the 3A and parts. Fantastic drive. Very underrated.
|
Originally Posted by thisistank
(Post 4784045)
Wish they still made the 3A and parts. Fantastic drive. Very underrated.
|
First trip out 2 weeks ago with 3A's same props as last year seem same speeds as my 1.58 at cruise, no WOT test yet. I would have thought I would lose some mph going to 1.68?
got a set of 3 blades with them I'm gonna compare this weekend, dude said the apache loved them.. stay tuned https://cimg0.ibsrv.net/gimg/www.off...0dce62bfc.jpeg https://cimg1.ibsrv.net/gimg/www.off...85b6a8134.jpeg https://cimg3.ibsrv.net/gimg/www.off...5a98c93b1e.png https://cimg8.ibsrv.net/gimg/www.off...1d4979d42.jpeg https://cimg0.ibsrv.net/gimg/www.off...8b5778a49.jpeg https://cimg3.ibsrv.net/gimg/www.off...838537564.jpeg |
Starting early, nice job boner!
|
Haha thx! Going to rack this sat!
|
Tim , looking good . I am kinda sorry I got rid of the Hawk off my Flat deck . If you ever get out on lake Ontario let me know . Toronto by water is pretty cool . Lots of spots to boat to for a freshment or 2 . Cheers RG.
|
All times are GMT -5. The time now is 02:05 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.