![]() |
Cafe Racer Deck Hatch issues
What have you guys done to prevent leaks? First time mine has seen rain since I’ve owned it this past weekend and noticed it coming in through the hatches. Seen on lip ship they have seals but are they for the Cafes? My seals SEEM to be ok but I wouldn’t be surprised if they are the original ones and are just worn and flat from time.
https://cimg7.ibsrv.net/gimg/www.off...82026fc7b.jpeg |
Replace seals with lip ship OEM.
make sure you get them placed so they seal properly. make sure your drain holes are clean so water doesn’t puddle up. |
?
Originally Posted by seafordguy
(Post 4904401)
Replace seals with lip ship OEM.
make sure you get them placed so they seal properly. make sure your drain holes are clean so water doesn’t puddle up. |
Holes in the deck go into the back of the hatches
|
Awesome!
Originally Posted by TICafeRacer
(Post 4904628)
https://cimg9.ibsrv.net/gimg/www.off...b552671e3.jpeg
Hopefully this shows the holes properly where do they drain to? thanks! |
The backside of the inside of the hatch by where the strut connects. I will try to take a picture today and show it.
|
Thanks!
Originally Posted by TICafeRacer
(Post 4904672)
The backside of the inside of the hatch by where the strut connects. I will try to take a picture today and show it.
man I sure appreciate it!! |
Second attempt
Here it is. I tried once and something went wrong. It is the hole under the screw on the right.
https://cimg7.ibsrv.net/gimg/www.off...d972a5059.jpeg |
I think they are molded so you may be able to blow them out with compressed air……
|
Looks like a raised fiberglass rim covered completely by the hatch? The only way they would leak is if the drain was plugged and the captured water is sloshing when running getting past the seals, or totally full and weeping past bad seals?
|
| All times are GMT -5. The time now is 11:15 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.