What drives would you get?
#11
I WOULD SUGGEST THE 3A'S. I'M RUNNING 1000HP THROUGH EACH OF MINE ON A TOP GUN, AND THEY HAVE STOOD UP WELL,AND IT HAS SEEN SOME ROUGH OFFSHORE WATER.ALTHOUGH I DID LOOSE A U-JOINT LAST SUMMER THAT RIPPED EVERYTHING FROM THE BELLHOUSING TO THE TOP OF THE DRIVE.BUT, HELL WHAT'S 20,000 WHEN YOU'RE HAVING FUN.
HOWARD
HOWARD
#13
Donz,
I have owned many TRS boats over the years and have had great luck with them. They are much stronger than a Bravo and shift a hell of a lot better too because of the transmission required.
I'm currently running @700 hp through my TRS in an older Top Gun and for the most part they have worked real well. I'm sure if I was running Bravo drives I would have blown many over the past two seasons.
From my experience with them, 650 hp will be fine. I have been told that the TRS will live longer if you stay with a three blade prop. (4 blade will get a bit too much bite) and spin the motors a little higher (a tad lower pitch than called for) also to reduce load on the drive.
I would not be afraid of a TRS boat one bit. There are some incredible bargains out there right now, and now that Konrad offers the K-540 TRS replacement drive, TRS parts will not be an issue in the future.
I have owned many TRS boats over the years and have had great luck with them. They are much stronger than a Bravo and shift a hell of a lot better too because of the transmission required.
I'm currently running @700 hp through my TRS in an older Top Gun and for the most part they have worked real well. I'm sure if I was running Bravo drives I would have blown many over the past two seasons.
From my experience with them, 650 hp will be fine. I have been told that the TRS will live longer if you stay with a three blade prop. (4 blade will get a bit too much bite) and spin the motors a little higher (a tad lower pitch than called for) also to reduce load on the drive.
I would not be afraid of a TRS boat one bit. There are some incredible bargains out there right now, and now that Konrad offers the K-540 TRS replacement drive, TRS parts will not be an issue in the future.
#14
biggus, you always make me smile when you post pictures of my new rig. i posted that in dec when i was kicking around with maybe getting #3's. i am very happy with the trs and will keep them as long it makes sense to. im not going to say it doesn not make any sense to pour money into a cafe with crazy updates. if the boat is right for you, do what it takes to put a smile on your face with the rig you are into. i do know i will be getting another boat within the next few yrs. either biggus t/g or something along those lines.lol....i really like the cafe racer and plan on never getting rid of it, so i will update till my heart is content. i plan on updating the birth, the dash, and would like to update the drives, some day. for now the trs will be fine and i had just found out they had been redone before i bought the boat, along with fresh power. so im happy, for now....hey biggus did my driver ever get there, where is my t/g? dave



