post some pics of your myco trailers
#1
Registered
Thread Starter
post some pics of your myco trailers
im redoing my myco, adding a bow stop, pimping it out. its tres old trailer for his top gun. so its done up in his virgin paint. pretty sharp just needs some love. show me some pics of yours, and some close up of the bow stops. thanks dave
#3
Platinum Member
Platinum Member
Re: post some pics of your myco trailers
Not to clear but this is what I have on the office computer.
It is exactlly like on Brent's Gladiator.
It is exactlly like on Brent's Gladiator.
#6
Charter Member
Charter Member
Join Date: Jan 2003
Location: GLOC
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Re: post some pics of your myco trailers
I just redid mine, your first phone call should be to Myco.
They will sell you any part you need and they are very reasonable price wise!!!
I was surprised!!!
They will sell you any part you need and they are very reasonable price wise!!!
I was surprised!!!
#7
Registered
Thread Starter
Re: post some pics of your myco trailers
well that is what i did. i have all the parts from myco i need, now im just pimping it out. its a easy ordeal for me, i still have a fabrication shop my my old co. im able to sand blast and repaint in emron, since the trailer was set up for racing, i needed to add a bow stop and rewire the lights and im pretty much set besides redoing the bunks for a non stepped. im excited about this project, and was just looking to you guys for location of some stock parts. thanks for all the imput. dave
Last edited by stecz20; 06-29-2004 at 03:46 PM.
#8
Platinum Member
Platinum Member
Re: post some pics of your myco trailers
Dave,
My trailer is for a twin step also Phil just put inserts so the bunks would all be level. When we get a twin step all we have to do is take out the inserts and doe, small pieces of plywood should do.
My trailer is for a twin step also Phil just put inserts so the bunks would all be level. When we get a twin step all we have to do is take out the inserts and doe, small pieces of plywood should do.
#9
Registered
Thread Starter
Re: post some pics of your myco trailers
thanks, gl... the 2x6's need some work so im just going replace and re carpet. the set up for a non step, is single 2x6's, so im going to just take out the second 2x6 put in for the steps. not bad at all. needs new hardware as well, joe damiano, with the nice 37 outer limits is going to let me use his trailer while i work on mine. im looking forward to the project, and will post some pics as i go. thanks for all the impute.... dave