Re: HORBA Forum
 

Some more photos of engine and inj system. bore is 4,25 and stroke is 4,25. Roller cam with aprox 0,7" lift , stainless roller lifters, Carillo rods
Best regards Joern

Re: HORBA Forum
 

Some more pics of the front cower with gears

Best regards Joern

Re: HORBA Forum
 

36widebody,I have the old catalog of the Aeromarines.
If you are interested I can scan it for you and send by e-mail.
http://img204.imageshack.us/img204/2...emanualkh4.png

Re: HORBA Forum
 

Those velocity stacks are awesome!!!!!!

Re: HORBA Forum
 

Marco, I would be very very grateful if you could scan the book and mail it to : [email protected]
The guy who had the engines lost his copy and that would be a nice part of the documentation for the restored Aeromarine 3.

Regards Joern

Re: HORBA Forum
 

Sunsation 25,
Yes they are impressive and the same configuration as the Can-Am setup GM used. Rumers say they are from Crower but all over there is Kiekhaefer casting marks. We might go with todays technology and EFI with el-injectors if we are unable to manage the mechanical system, the dyno run will show. As you can se on the enclosed pic bosses are already cast on the lower part of the manifold, but not yet machined.

reg Joern

Re: HORBA Forum
 

Thanks for the pics! Nice collection!