|
HORBA Forum
HORBA Forum
Many members of the Historic Offshore Race Boat Association have asked that we start a forum. We are not set up to do that, but with this new section of OSO, maybe we could use this space and encourage our members to join over here at OSO, and have a forum specifically about the old race boats. www.historicraceboats.com |
Re: HORBA Forum
3 Attachment(s)
Some of our members have already restored their old race boats and the list is growing daily...maybe they would post their boats.
Here are some for now. |
Re: HORBA Forum
3 Attachment(s)
Originally Posted by Top Banana
Some of our members have already restored their old race boats and the list is growing daily...maybe they would post their boats.
Here are some for now. And some of us have done it 2 or 3 times..........m.m....... |
Re: HORBA Forum
1 Attachment(s)
Originally Posted by el indio
And some of us have done it 2 or 3 times..........m.m.......
Thanks Mark....now explain to the folks who don't know, what those pictures are. Why did we use staggered engines and what was the fuel capacity of the old race boats? My boat, the Top Banana, carried 510 gallons of fuel between saddle tanks on either side of the engines and tanks located just ahead of the dash area. We shifted fuel back and forth as we needed different weight distribution during the race and at the end of the race, we would pump over the side any extra, trying to get the boat as light as possible. This forum can be used to answer questions from people that never saw an open ocean race or some of the equipment used back then. |
Re: HORBA Forum
1 Attachment(s)
1-step plate in front of rear motor.Step plate none skid painted by Gail Paik.
2- H.B.R. motor to re-power. 3-De rigged 41 prior to re-rigg. |
Re: HORBA Forum
Staggered motors,saddle tanks give the boat the proper center of gravity.Boat should ride level.......m.m.......
|
Re: HORBA Forum
My Sutphen Race Boat was built to be a racer. It has two tanks 1 under the floor & 1 in the cabin. There are pumps that switch the fuel in case you need more weight forward or aft.
LS |
Re: HORBA Forum
fuel transfer system is real nice......do you have the little lexan view block on the dash?.........m.m....
|
Re: HORBA Forum
p.s.....just had
jim at The Marine Shop Inc........changed all the fuel lines......no problems.Juat time to change them.........m.m.....P.S.... Jim does great work......mark...... |
Re: HORBA Forum
1 Attachment(s)
motors in ......
|
| All times are GMT -5. The time now is 07:39 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.