1963 Biesemeyer 4 Point Hydro
08-24-2016 | 08:09 PM
#111
Thread Starter
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
above right, fuel tanks vent
left exhaust, bilge pump (big one) outlet. I've taken a wave over the transom and don't have the duckbills Archer mentioned.
The one in the center is a stern light. Like to run in the evening when its a bit calmer where I boat so the drag boat has lights.
I think I still have the guy's name somewhere who make the Biese tags still today. Something like 125 bucks.
PS, I stole the idea for the paint off this old Biese picture.
left exhaust, bilge pump (big one) outlet. I've taken a wave over the transom and don't have the duckbills Archer mentioned.
The one in the center is a stern light. Like to run in the evening when its a bit calmer where I boat so the drag boat has lights.
I think I still have the guy's name somewhere who make the Biese tags still today. Something like 125 bucks.
PS, I stole the idea for the paint off this old Biese picture.
Last edited by f_inscreenname; 08-24-2016 at 08:16 PM.
08-25-2016 | 09:38 AM
#113
Registered
Joined: Aug 2016
Posts: 11
Likes: 0
I'm beginning to think mine is 1958. I see the exact same one in a picture. Mine has the V at the back below the exhaust whereas yours has the V between the exhaust. I can't figure out how to attach pictures here but I can email you if you provide an email address.
08-25-2016 | 10:07 PM
#115
Thread Starter
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
According to Bill's book they were only made in 1959. In 1960 Bill also left the company (Rusty was already gone) and the company closed down shortly after.
