![]() |
Had mine out on this past Tuesday..........couldn't resist a 65 degree day in December.:whistle:
http://i29.photobucket.com/albums/c2...204_154033.jpg |
3 Attachment(s)
I liked my Mistress. Drove great, never needed Tab. Throttle and go, great balance.
|
3 Attachment(s)
Short Freeboard compared to the Top Gun
|
To all those that run in the ocean.......how do you keep ahead of the corrosive salt and it's effects on the engines?...Even with CC and flushing must still be half the life of a fresh water boat no???......... 2 very top notched breds of boats!...KV is my choice here!!
|
so true but IRRItating
Originally Posted by Full Force
(Post 3827812)
I think any KV or Mistress over 25,000 with no updating is pushing it for price, if its more it better have at least newer gauges/throttles/exhaust/hydraulic steering and such...
just so many deals out there, I got very lucky finding mine with no power... and I have a rotted Baja for the doner boat...worked out well..I'm in mine CHEAP.. |
Originally Posted by way2fast
(Post 3829314)
So true but what can you do when the vendor thinks his boat is worth so much more then the same one that isn't his... or he just wants to rip you off.... I have been negotiating for too long now really annoying me as I like the boat but know it is not worth that price!
|
Originally Posted by 28cigarettess
(Post 3827830)
Had mine out on this past Tuesday..........couldn't resist a 65 degree day in December.:whistle:
http://i29.photobucket.com/albums/c2...204_154033.jpg Hows yours running? Race hatches look great. |
Originally Posted by cigrocket
(Post 3827908)
I liked my Mistress. Drove great, never needed Tab. Throttle and go, great balance.
|
3 Attachment(s)
Originally Posted by MILD THUNDER
(Post 3829409)
I think you had one of the nicest mistresses around. If I remember right, your engines were around 650HP? How fast did it run? How does the ride compare to your gun?
The mistress always rode perfect, never really needed to play with it much. I had big tabs, but I never had to adjust them. I kept them one quick click up from neutral and never needed to adjust it. The boat ran great, The only draw back of the mistress was the freeboard. I am 6' 5" and the freeboard made it look kind of ridiculous. The top gun needs some adjustment once in a while. However, I am running alot faster. The Top Gun likes to fly with nose up a little. I also have a super High X Dimension on the gun with 3A drives. They act like 5's with the high x. Kind of likse surface drives. I have the 1:68 ratio and spin some Tall Wheels Thanks for the compliments ( I like the Guns Freeboad, Cabin, Ect.) |
Originally Posted by cigrocket
(Post 3829416)
I had between 650-675 NA engines. I ran 75 all the time when it was a TRS boat. Then I got the Konrads and the boat would run 77-78. I also think I could have done some prop work and probably gotten 80 out of it. But I sold it, and I don't really care to much on the top speed.
The mistress always rode perfect, never really needed to play with it much. I had big tabs, but I never had to adjust them. I kept them one quick click up from neutral and never needed to adjust it. The boat ran great, The only draw back of the mistress was the freeboard. I am 6' 5" and the freeboard made it look kind of ridiculous. The top gun needs some adjustment once in a while. However, I am running alot faster. The Top Gun likes to fly with nose up a little. I also have a super High X Dimension on the gun with 3A drives. They act like 5's with the high x. Kind of likse surface drives. I have the 1:68 ratio and spin some Tall Wheels Thanks for the compliments ( I like the Guns Freeboad, Cabin, Ect.) |
| All times are GMT -5. The time now is 06:08 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.