There is a 38ft scorpion hull only in Miami craigslist for 5k obo seems like they were gonna go outboard with it. Check it out all you scorpion fans wheres el bombero ?

It looks like an old Miami "work boat" ......

is there a link to the 38 hull in Miami Craiglist? can't seem to find it doing a search
thank you

Dont have link , but search scopio 38 ft or scorpio 38, not spelled correctly.

Is it the 37 "El Diablo" or the 38? The former Pantera 38.

That's what it looks like. What a shame

That is the earlier 38.' The molds were purchased from Pantera. Same boat as the original 38' "El Boss" This is NOT the 37 "El Diablo".

Here is the El Boss Pantera 38. In the middle is the 38 Cougar that I bought from the Hapren Estate.

Step plates mock up
 

Mocking up step plates. [ATTACH=CONFIG]536374[/ATTACH]

El Boss circa 78-79 ? Willy Diaz driver Julito el bombero on the sticks. Love the Super Q decal on the boat!

Great Products.

http://www.mcnichols.com/products/wi...ainless-steel/

Yeah they have goof stuff in stainless. This is our design idea for the intakes but can only find it in ABS. Which may not be a bad idea since the abs is pliable and paintable .

Tambor door Mock up
 

Tambor doors came in this week from Tap-Ease. Lots of cutting, sanding and fabricating to make these work. Boats aren't built square.

Tambor Doors
 

So the outer portion of this install is almost complete. The interior portion is more tricky. Contours, slopes and final attaching it to the ceiling ...

Wanted to ask did the 32 Bad Boy come from 32 Scorpion mold but the BB added a step in the bottom ? Also any relation to Mirage Powerboats (Florida) using Scorpion molds. Thanks

Scorpion bilge paint
 

[ATTACH=CONFIG]540219[/ATTACH][ATTACH=CONFIG]540218[/ATTACH]Current situation.... Painted bilge. aluminum gloss. Used Rustoleum Enamel with hardner. Four coats. .

Semi finished .
 

We re-did the diamond plate added a few new pieces and a step over the sea strainers. Cutting holes for the seas strainers sight glass.

Island style paint booth
 

[ATTACH=CONFIG]540221[/ATTACH]Prepping engine brackets for paint. Home made paint booth. Island style

Rear bench seat
 

Started the build on the rear bench seats. After looking at tons of pis we decided to go with this set up.

good job,looks awesome

Thank you for the encouragement. OSO has been the absolute Only way this could happen. Thank you Gentelmen for posting your projects and ideas that inspire so many boaters !!!

Build up is looking great Guilderoy.

Is there any sort of PN attached to those size specs looks like what I HAVE BEEN LOOKING FOR.

Thinking about Midnight,s almost purcased a center console one from SeaTow out of Stuart FLA years ago. Had twin 750 HP motors at one point did 115 MPH. Sat for a long time as there was an agument over who owned it after sea tow rescued it from the south side of the Stuart Inlet. The owner at nite thought he was comming in a different inlet.

I have a beautiful 24' Carrera totally redone and upgraded to Bravo, big KK trim tabs and tubular swim platform, email me at [email protected]

I have a 32 triple 2.4 1986

Any pictures?

hey lowblue320 I have pictures on my profile this is the way I got my 32

[IMG]sam0068[/IMG]

hello do you still have a 25 inch lower unit

[ATTACH=CONFIG]551692[/ATTACH][ATTACH=CONFIG]551693[/ATTACH] like this 1

PROGRESS PICS ON THE 37 scorpion
 

Sanding and getting ready for paint.

Scorpion 37 progress oics
 

Mocking up the interior. Using PVC panels for interior the interior upholstery, lonseal Wave Floorong .

Slow progress is still progress..

Progress pics on 37 scorpion
 

Boat on jacks

37 scorpion progress pics
 

Installed Hatches for access to fuel tank senders

Anyone know if there were any scorpion boats that used to race the GLOPRA circuit way back in the day?

back in the late 80s early 90s there was a triple engine scorpion called ocean commotion on long island south shore

scorpion
 

scorpion