Offshoreonly.com
1  2  3 
Page 2 of 3
Go to

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Classic Offshore (https://www.offshoreonly.com/forums/classic-offshore-199/)
-   -   Cortes Mirage Info (https://www.offshoreonly.com/forums/classic-offshore/331154-cortes-mirage-info.html)

h2oboater 10-24-2015 10:58 AM

1 Attachment(s)
Quote:

Originally Posted by Cary 29 (Post 4369304)
What drives were on that.

I believe it had Merc speed #3 drives, here is a pic of them.

TENSION 10-24-2015 08:44 PM

I believe that Todd, "Mid-Ocean", has Armed and Dangerous for sale. It was near Charlotte, NC. There were several current condition photos posted by him, it looked very restorable.

Cary 29 10-24-2015 09:32 PM

A friend of mine said he saw it on the race coarse and it was awesome.

h2oboater 10-24-2015 11:22 PM

Quote:

Originally Posted by TENSION (Post 4369439)
I believe that Todd, "Mid-Ocean", has Armed and Dangerous for sale. It was near Charlotte, NC. There were several current condition photos posted by him, it looked very restorable.

I believe Mid Ocean has sold it & it's now out of the country.

h2oboater 10-24-2015 11:25 PM

Quote:

Originally Posted by Cary 29 (Post 4369453)
A friend of mine said he saw it on the race coarse and it was awesome.

We raced against it with our Eastern Express Skater in C class, that Mirage rocked in big water.

salty dog 11-03-2015 07:49 PM

How fast was the 36ft with 502s trs drive set up?

Norris3710 11-05-2015 12:19 AM

My 36 best I've seen 69mph on gps with 502's and speedmaster 3's

salty dog 11-17-2015 07:15 PM

How many 32s were made how did they ride?

salty dog 11-24-2015 11:25 PM

Was Byng Goode Midnight Express better than the Cortes Mirage ? Ironically I think Pedro Medina at one time or another worked at both boat builders.

lucky strike 11-26-2015 09:57 PM

A few for you guys
 
5 Attachment(s)
[ATTACH=CONFIG]548073[/ATTACH][ATTACH=CONFIG]548074[/ATTACH][ATTACH=CONFIG]548075[/ATTACH][ATTACH=CONFIG]548076[/ATTACH][ATTACH=CONFIG]548077[/ATTACH]

akronspeed 11-27-2015 06:24 AM

Great Pics! Thank you for sharing.

Cary 29 11-27-2015 08:48 AM

Yes Thanks for sharing the pictures. My boat was Bob Latham s. I think he was throttling Evil ways at that time. He also throttled Magic Gems and Man O War.

lucky strike 11-27-2015 04:56 PM

I throttled M-44 that year.

That Mirage was built as Great Adventure
.It speared a wave in the first race of the year in California & tore the deck off.
That was the end of the GA Mirage for the team.

h2oboater 11-27-2015 10:35 PM

1 Attachment(s)
Here is a Lake St Clair Mirage that upset many racing in the APBA P class back in 1976 the HAWK,:eek: as it had staggered Merc 280TRS engines. This is one more classic that has vanished.

lightspeed 11-28-2015 01:57 PM

Quote:

Originally Posted by h2oboater (Post 4369321)
I believe it had Merc speed #3 drives, here is a pic of them.

We had late model 3As 1.68 ratio on the boat those drives in the pic are not the ones we ran, cortes only made 4, 32s

Thriller62 12-02-2015 08:12 PM

2 Attachment(s)
Interested in this boat. Does anyone know what happened to it or if it sold?
[ATTACH=CONFIG]548240[/ATTACH][ATTACH=CONFIG]548241[/ATTACH]

Thriller62 12-07-2015 06:58 PM

The Mirage posted above was sold. Does anyone know if there are any 25 foot Cortes-built Mirages out there?

h2oboater 12-08-2015 11:21 AM

Quote:

Originally Posted by Thriller62 (Post 4383166)
The Mirage posted above was sold. Does anyone know if there are any 25 foot Cortes-built Mirages out there?

I never heard of a 25' Cortes Mirage, the dealer here in the Detroit [ Pete Smith,, Wolverine ] area never sold one that I know of..

lightspeed 12-08-2015 01:45 PM

yes they made a 25 looks just like the 30,, but very few

lightspeed 12-08-2015 01:48 PM

Quote:

Originally Posted by Thriller62 (Post 4383166)
The Mirage posted above was sold. Does anyone know if there are any 25 foot Cortes-built Mirages out there?

Theres a 30 sitting for years in a boat yard in freeport LI ,i will get some info if u want

Thriller62 12-08-2015 08:13 PM

Lightspeed, I would be interested in more info. Not too many Mirages out there. Thanks.

h2oboater 12-08-2015 11:46 PM

Quote:

Originally Posted by lightspeed (Post 4383455)
yes they made a 25 looks just like the 30,, but very few


Right you are I forgot about this thread, if you red post # 4 they mentioned them.
http://www.offshoreonly.com/forums/c...32-mirage.html

Cary 29 12-09-2015 07:04 AM

I wonder how close in design my 29 Cary is to the Mirage. Mine measures 29'9". Is the Mirage exactly 29'?

Thriller62 12-09-2015 03:22 PM

Quote:

Originally Posted by Cary 29 (Post 4383651)
I wonder how close in design my 29 Cary is to the Mirage. Mine measures 29'9". Is the Mirage exactly 29'?

gunwale length 29'8' centerline length 29' even.

Cary 29 12-11-2015 07:55 AM

Thanks for the info Thriller. Bottom probably same 24 degrees all the way to the transom.

hallj 12-11-2015 07:47 PM

Compare strake width at the transom between the Mirage and Cary.

Jeff

Thriller62 12-11-2015 09:28 PM

1 Attachment(s)
Quote:

Originally Posted by Cary 29 (Post 4384245)
Thanks for the info Thriller. Bottom probably same 24 degrees all the way to the transom.

Yes. It's 24 degrees all the way down

[ATTACH=CONFIG]548696[/ATTACH]

Cary 29 12-12-2015 03:57 PM

Quote:

Originally Posted by hallj (Post 4384377)
Compare strake width at the transom between the Mirage and Cary.

Jeff

My strake width is aprox. 3 1/2"

Thriller62 12-13-2015 03:04 PM

Quote:

Originally Posted by Cary 29 (Post 4384570)
My strake width is aprox. 3 1/2"

4" on the mirage

hallj 12-13-2015 08:04 PM

So this tells us that the Mirage is most likely popped from a 28 Cig and the Cary is popped from a Magnum.
Cortez worked for Cigarette with Sonny and Bob at the time the 28 was built. They used a Magnum hull, added the second rub rail line and widened the strakes by a 1/2".
Makes sense,

Jeff

Cary 29 12-14-2015 07:07 AM

Quote:

Originally Posted by hallj (Post 4384866)
So this tells us that the Mirage is most likely popped from a 28 Cig and the Cary is popped from a Magnum.
Cortez worked for Cigarette with Sonny and Bob at the time the 28 was built. They used a Magnum hull, added the second rub rail line and widened the strakes by a 1/2".
Makes sense,

Jeff

Maybe Jeff, I think Brownie would know. They look very similar. I'm curious as to why they still called mine 29 when the center line length is 3" shy of 30'. Almost always the company's rounded up. I think this hull becomes a Power Play . Bob Latham told me he got it in 1980. They were removing the sign on the building and putting up Blackfin as he was leaving.

andyy 04-14-2017 06:05 AM

Does anyone know the first 3 letters (HIN) of the original Cortes Mirage?

olredalert 04-14-2017 08:13 AM

----Wonder how many of the center consoles they built?.......Bill S

Thriller62 04-14-2017 12:49 PM

CDB is what my title says

Thriller62 04-14-2017 12:52 PM

Quote:

Originally Posted by olredalert (Post 4546260)
----Wonder how many of the center consoles they built?.......Bill S

There is a 29 center console for sale on south Florida craigslist with twin outboards

h2oboater 04-15-2017 08:04 AM

1 Attachment(s)
Here is a pic of the 29' Mirage CC, looks like they built them also as a single engine...

olredalert 04-15-2017 09:30 AM

----That's what made me think of it, Mark!.......Bill S

BudMA 06-22-2017 09:53 AM

Hey guys. Just discovered Mirage and found a couple in my price range. Wondering if anybody can tell me more about them.
Thanks.

http://www.iboats.com/sites/northstar/site_page_11197/item_425864.html

http://www.yachtworld.com/boats/1977/Mirage-SS-1294674/Harsens-Island/MI/United-States#.WUvXR_cpDqB

http://www.boatersresources.com/boat-for-sale/1977-Mirage-9-Meter-SS-Used-402684?

dsp3930 07-22-2017 12:26 PM

1976 Mirage 9M SS
 
I just posted my 9M SS today on Ebay as item #332313642646
The engines are in good shape but will likely need a valve job in the near future.

numberonemarine 09-26-2019 06:14 PM

The original builder Cortes is my family on my mother’s side and if anyone is interested my brother and I have a mold of the mirage it was stretched to 32’ but can be damned and built to 29’-32’. We can build a custom boat using all composite materials. Let me know if interested


All times are GMT -5. The time now is 07:32 AM.
1  2  3 
Page 2 of 3
Go to


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.