Boat Leveler
06-11-2010 | 10:37 PM
#13
Thread Starter
Registered
Joined: Jul 2006
Posts: 2,034
Likes: 1
From: Oshawa, Ontario, Canada
Well, I am pretty sure we can swing a deal for the pump, and THANKS! again for the help!
I had a quick look yesterday, my tab rams DO have the indicators "clamped" over top of the tab ram [only on 1 ram per side] so, either there is a wiring issue or they are just "dirty" and the magnets need to be realigned as some members have suggested. I was wondering what all is involved in removing them and taking them apart and realigning everything? Is there any way I can use a Multimeter and see if the gauge is getting a signal from the indicators? Thanks again for the help guys, I think with your help I may get a handle on this!
Michael
I had a quick look yesterday, my tab rams DO have the indicators "clamped" over top of the tab ram [only on 1 ram per side] so, either there is a wiring issue or they are just "dirty" and the magnets need to be realigned as some members have suggested. I was wondering what all is involved in removing them and taking them apart and realigning everything? Is there any way I can use a Multimeter and see if the gauge is getting a signal from the indicators? Thanks again for the help guys, I think with your help I may get a handle on this!
Michael
