540 carb???
12-08-2011, 11:19 AM
#3
Gold Member
Gold MemberThread Starter
Im not real sure I ordered the afr marine heads from a shop a few years ago new and the cam also they have since then closed down and im not sure the specs. There is like a serial number or something on the side of the heads I can try and get that number if it helps. I dont really know what to do at this point.
12-08-2011, 11:57 AM
#4
Registered
iTrader: (2)
Join Date: Jan 2009
Location: TEXAS
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Im not real sure I ordered the afr marine heads from a shop a few years ago new and the cam also they have since then closed down and im not sure the specs. There is like a serial number or something on the side of the heads I can try and get that number if it helps. I dont really know what to do at this point.
12-09-2011, 10:07 AM
#6
Registered
iTrader: (2)
Join Date: Jan 2009
Location: TEXAS
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
So you have no clue what your compression or cam is? Is this a blower motor or N/A.
12-09-2011, 10:32 AM
#8
Registered
iTrader: (2)
Join Date: Jan 2009
Location: TEXAS
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
I made 738HP on my 540 with 315 cnc heads 9.1 compression Edlelbrock victor jr. intake custom cam with a Berry Grant 1000cfm 4150 style carb. I change to a ProSystem dominator 1050cfm carb and a edlebrock 454 victor intake and pick up 3MPH. Dont have any dyno numbers thou.
Last edited by goebel1; 12-09-2011 at 11:18 AM.
