Coil ground
#1
Registered
Thread Starter
Coil ground
Hi.. Just replaced the coil in the 454, and checked for 12 v between the + and -, and had nothing. I have 12 v from the + to the manifold tho.. Normal? No cont between the - post and manifold with the key on, but it's there with the key off.. Is this right? Thanks!
#2
Platinum Member
Platinum Member
iTrader: (6)
its fine , the - side of the coil is not a true refference point for ground.
#4
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
fixx
this will tell you if its working ok...turn on the ignition on,,remove the coil wire from the dist,stick a screwdriver into the center of the coil wire and have a friend that knows nothing about cars or boats hold on to the metal part of the screwdriver,now touch the negitive side of the coil with a ground wire and if he gets knocked on his ass you know its working...
#5
Registered
Join Date: Jan 2007
Location: Murrayville Georgia
Posts: 1,818
Likes: 0
Received 893 Likes
on
320 Posts
this will tell you if its working ok...turn on the ignition on,,remove the coil wire from the dist,stick a screwdriver into the center of the coil wire and have a friend that knows nothing about cars or boats hold on to the metal part of the screwdriver,now touch the negitive side of the coil with a ground wire and if he gets knocked on his ass you know its working...