Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Do It Yourself, Boating on a Budget (https://www.offshoreonly.com/forums/do-yourself-boating-budget-249/)
-   -   whats the difference between these two couplers (https://www.offshoreonly.com/forums/do-yourself-boating-budget/309464-whats-difference-between-these-two-couplers.html)

stimleck 06-01-2014 07:58 PM
hi folks well it turns out that the tool fits fine I just needed to push a bit doh! the stock 454 coupler only had 3 bolts the coupler on the 502 had 8 I think
I stuck with that one, I did notice that the 454 had a plate behind the flywheel, is that mandatory?

located in toronto

Originally Posted by Port Monster (Post 4130987)
Stimleck = where are you located??

dereknkathy 06-03-2014 06:17 AM
plate behind flywheel is probly balance plate to adapt 350 or other neutral balance flywheel to ext balance 454. not NEAR as good as correct flywheel. also, they could be wrong about needing it or getting correct one. ck flywheel part number and look for balance weight cast into outside of flywheel.

motor 06-03-2014 06:27 AM
Full circle coupler on the 502 and other bravos ,is held on with 6 bolts...
Originally Posted by stimleck (Post 4131056)
hi folks well it turns out that the tool fits fine I just needed to push a bit doh! the stock 454 coupler only had 3 bolts the coupler on the 502 had 8 I think
I stuck with that one, I did notice that the 454 had a plate behind the flywheel, is that mandatory?

located in toronto


All times are GMT -5. The time now is 11:42 PM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.