Originally Posted by Randy Nielsen

These avatars are getting dangerous, I was reading MT's comment while looking at the avatar & it made perfect sense!!

Originally Posted by ICDEDPPL

Lets try this again, I looked over my set up and I think the only way to get all the oil out is to let all the other lines drip back to the pan like Griff said.
Then hook up a vac pump to the line that goes to the bottom of the cooler. On mine its accessible at the top. All I`d need is an adapter to hook to my -10an line.

The box is a vacuum pump btw , I`m an awesome drawer

Originally Posted by buck35

You will want to lube those valves with sb's peanut oil

Originally Posted by Black Baja

After 9 pages of posts I'm glad someone finally figured out how to do an oil change. I'm left wondering though if the love birds kissed and made up and also if they had any make-up relations...

Originally Posted by 4bus

Black Baja - added to the "list"

The thread wasn't about changing oil, it was about what oil to use.....did you miss that?

Originally Posted by Black Baja

No, initially it was about how to do a complete oil change. Oh I got it u guys kissed and made up and you don't want to end up in the dog house.

Lovers quarrels I tell u...

Originally Posted by 4bus

I recently learned it was impossible to change all the oil, so I am no longer going to change my oil.

And no make up, thread was deleted by the oso gods. It was using a lot of bandwidth yet not providing any useful information....but it was fun.

I was hoping ICEDCOFFEE would send me a free "vacuum box" for all my trouble