Hatch lift
#1
So I am looking at adding a hatch lift in the next couple of months and found this hydraulic lift by Dana Marine, does anyone know where I can purchase this (If they still make it).
Thanks
Bryan
Thanks
Bryan
Last edited by inspector747; 04-14-2014 at 10:24 AM.
#2
Registered

Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
#5
Registered

Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
Ya I would love to own a set. They open the hatch up Fast!. But for the $$$$ I'll keep my set up.
Cp close to same $$$$, and looks to be the same kit http://www.cpperformance.com/p-327-h...ch-hinges.aspx
Cp close to same $$$$, and looks to be the same kit http://www.cpperformance.com/p-327-h...ch-hinges.aspx
Last edited by 92nsx; 04-15-2014 at 07:15 AM.
#6
Ya I would love to own a set. They open the hatch up Fast!. But for the $$$$ I'll keep my set up.
Cp close to same $$$$, and looks to be the same kit http://www.cpperformance.com/p-327-h...ch-hinges.aspx
Cp close to same $$$$, and looks to be the same kit http://www.cpperformance.com/p-327-h...ch-hinges.aspx
#7
Registered

Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
#10
Registered

Joined: Mar 2012
Posts: 1,230
Likes: 27
From: Clearwater, Mn
CP $1199.99
Tryed to find the youTube video some one posted a wile back but can't find it. In the beginning it showed the speed of the hatch opening/closing. I dont rememer the boat but I believe it was liek a baja 272, 27 fountain, something in that size range that was pretty fast (90-100 mph), and some of the comments on here were "**** even his hatch is fast!"


