Offshoreonly.com

Go Back  Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget
598 to the dyno >

598 to the dyno

Register
FAQ
Calendar
Today's Posts
Search
Vendor Directory
Notices

598 to the dyno

Thread Tools
 
Old 06-24-2015 | 08:58 PM
  #11  
Tinkerer's Avatar
Tinkerer
Registered
20 Year Member
 
Joined: Jan 2002
Posts: 4,612
Likes: 7
From: ALTO, MI
Default
What compression, Hyd roller or solid??
Tinkerer is offline  
Reply
0
Old 06-24-2015 | 09:05 PM
  #12  
14 apache's Avatar
14 apache
Platinum Member
20 Year Member
Platinum Member
 
Joined: Apr 2005
Posts: 2,150
Likes: 15
From: Northport N.Y.
Default
Originally Posted by dennis r
It made 850 hp I dyno my stuff at wesco it has a set of heads from Tony Mamo on it
That's good power! How much TQ did it make? What heads are they? How many CC are the intake runners?. Was it a big dollar porting job?
14 apache is offline  
Reply
0
Old 06-24-2015 | 09:47 PM
  #13  
IRONMAN's Avatar
IRONMAN
Charter Member
20 Year Member
Charter Member
 
Joined: Jan 2001
Posts: 1,237
Likes: 2
From: south east of dome island
Default
Originally Posted by dennis r
It made 850 hp I dyno my stuff at wesco it has a set of heads from Tony Mamo on it
What rpm for 850? How much peak torque?
Just curious as my hyd roller 4150 carb was way short of 850.
Oh those are fantastic valve covers also
IRONMAN is offline  
Reply
0
Old 06-24-2015 | 09:58 PM
  #14  
14 apache's Avatar
14 apache
Platinum Member
20 Year Member
Platinum Member
 
Joined: Apr 2005
Posts: 2,150
Likes: 15
From: Northport N.Y.
Default
Originally Posted by IRONMAN
What rpm for 850? How much peak torque?
Just curious as my hyd roller 4150 carb was way short of 850.
Oh those are fantastic valve covers also
What power you make 750-775-?
14 apache is offline  
Reply
0
Old 06-25-2015 | 07:15 AM
  #15  
dennis r
Thread Starter
Registered
 
Joined: Jan 2001
Posts: 1,098
Likes: 4
From: cedar springs mi
Default
It is a solid roller with a set of heads from Tony Mamo that are AFR 360 cc it is a CNC port that he made compression is 10.5
dennis r is offline  
Reply
0
Old 06-25-2015 | 07:16 AM
  #16  
dennis r
Thread Starter
Registered
 
Joined: Jan 2001
Posts: 1,098
Likes: 4
From: cedar springs mi
Default
Sorry for the sideways pic
dennis r is offline  
Reply
0
Old 06-25-2015 | 08:07 AM
  #17  
F-2 Speedy's Avatar
F-2 Speedy
Platinum Member
Community Builder
10 Year Member
Platinum Member
 
Joined: May 2012
Posts: 11,425
Likes: 3,953
From: Midwest & T-Rock
Default
That stout, congrats
F-2 Speedy is offline  
Reply
0
Old 06-25-2015 | 08:43 AM
  #18  
IRONMAN's Avatar
IRONMAN
Charter Member
20 Year Member
Charter Member
 
Joined: Jan 2001
Posts: 1,237
Likes: 2
From: south east of dome island
Default
Originally Posted by 14 apache
What power you make 750-775-?
Right on 762 then dialed it back a little to 750 for reliability at 5400 rpm top. Hyd roller, 9:1 set up for pump gas. AFR 325s. I am tempted to go swap in a solid cam after seeing those numbers though.
IRONMAN is offline  
Reply
0
Back to Subforum
Do It Yourself, Boating on a Budget
View Next Unread
Power steering pump compatibility question

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.