253

That baby is lookin good, let me know when going to the Dyno, I want to go watch
I can bring the Carb's , I left Ken a message but haven't head back from him.,you may want to call him.

snapmorgan

iTrader: (2)

Going to the dyno this afternoon with the first one. The one with the 420 on it.

snapmorgan

iTrader: (2)

Got on the dyno late this afternoon. After getting a few bugs worked out, we got to make 1 pull before calling it quits for tonight. Will start back in the morning and see where we end up. Here is the sheet from the one and only pull today[ATTACH=CONFIG]566358[/ATTACH]

MILD THUNDER

iTrader: (3)

How much boost was she making? Carbs out of the box ?

snapmorgan

iTrader: (2)

Carbs work done by Ken Jones performance here in Walnut Hill Illinois. Making 9 pounds of boost. I am probably going to need more carb

MILD THUNDER

iTrader: (3)

Dam, 9lbs and not even at 800hp? Something seems amiss big time. Your combo should be making more than that, quite a bit more than that.

What pulley ratio are you at?

mike tkach

iTrader: (3)

first pull at 32 deg timing,i think 34 or 35 will show 40 to 50 more hp.

mike tkach

iTrader: (3)

joe,did you install the cam straight up or advance or retard them?

MILD THUNDER

iTrader: (3)

Does seem like shes running out of steam early for that combo.

snapmorgan

iTrader: (2)

Degreed it straight up. Warming her up now with 36 deg