EFI to Carb Harness Questions
#1
Thread Starter
Registered

Joined: Jun 2013
Posts: 143
Likes: 12
From: Dallas, TX
I'm plugging my harness back up and since everything is moved around. I really don't know where **** plugs up.
plus a couple plugs have broken. I have a new harness to make one but I'd like to get it running with this one first and then custom make the other. I have other pics of plugs just prefer to start here. So this is a red wire and a orange wire and also yellow/red stripe. I'm pretty sure the yellow red goes to signal on solenoid. I'm think orange red go to lug on starter that is constant 12v from battery correct? Just need to put a ring terminal on it?

plus a couple plugs have broken. I have a new harness to make one but I'd like to get it running with this one first and then custom make the other. I have other pics of plugs just prefer to start here. So this is a red wire and a orange wire and also yellow/red stripe. I'm pretty sure the yellow red goes to signal on solenoid. I'm think orange red go to lug on starter that is constant 12v from battery correct? Just need to put a ring terminal on it?

#5
#6
Thread Starter
Registered

Joined: Jun 2013
Posts: 143
Likes: 12
From: Dallas, TX




